New Hull! FOUNTAIN P1 50" / 127cm Twin Setup

[Rocstar]

If you are interested send an e-mail to 'alex chen' <[email protected]>

The hull is vey well made and not very expensive 132 US$

[ATTACH=CONFIG]90043[/ATTACH][ATTACH=CONFIG]90044[/ATTACH][ATTACH=CONFIG]90045[/ATTACH][ATTACH=CONFIG]90046[/ATTACH]

I will use a twin setup, 4092 motors and 8S

50'' for $132 US, really?

[MrUnlimited]

I know Alex for many years and he is a dedicated boater!

[Alfa Spirit]

The design will be very simple

[Brushless55]

Nice action shot!

[Alfa Spirit]

Actually I have only the rudder for the hull an Arrow Shark (????) with long 150mm bracket , I will use those stingers from HOR, model made for 1/4" shaft. I will build a 1/4" shaft steped down to 3/16" for propellers and a 3/16" hole at the other side to glue a 3/16" flex shaft

[Alfa Spirit]

I order 2 x 4092 - 930kV for the Fountain, 10S for each combo



I will make red stripres on the sides and add rhe numbers "99"

[twissted]

This looks like a fun boat. It should do well in less than favorable waters.

[KillerDave]

This is looking great! Keep it up!!!
By the way, I want "red strippers" too but don't tell my wife! ;-)

[Alfa Spirit]

Hello KillerDave, how are you?
I don' t know how to make the red stripes painting or stickers. Or may be no stripes? What do you think? The design look great to me

[Alfa Spirit]

Motors arrived today, they look great,n well build. Motors are matched : 930kV

[KillerDave]

Hello KillerDave, how are you?
I don' t know how to make the red stripes painting or stickers. Or may be no stripes? What do you think? The design look great to me

I would go for the red stripes but it still looks great as it is... I see you have some red tape there, stick it on one side, stand back and see what YOU feel????
I would paint it as the water will peel vinyl off.
Heat looking boat you have!

[Alfa Spirit]

Well I' ll stick red vinyl from the sheet like this

[Alfa Spirit]

I received HRC water jackets 68mm long. The design of the FOUNTAIN is finished, I don' t know if I will apply a clear coat




If somebody is interested I sale two 40mm x 50mm water jackets

[Alfa Spirit]

I received motor mounts made by Hervé, I made some modifications because the HRC water jacket is 68 mm long .

[Alfa Spirit]

Parts of the hardware, stingers are very well made, I like the rudder with 4 water inlets, center mount and 2 arms for linkage