my brushless super hawaii project

[eclipse]

i will bend it more up then you guyes are my bosses lol.the holes are fine they are a bit uneven but its fine for me.but see the thing is i want the bateries to be mounted in the original place.what happens if i leave it at that angle?isnt that the reason for the flex shaft??

[z400]

what are you running for batteries?

[eclipse]

2 of these http://www.offshoreelectrics.com/pro...d=ep4500-7cell

[z400]

Oh i see


Where are you planning on putting both of those at?

[eclipse]

where the blue tape is.i was thinking of redoing the packs couse it wont fit in that configuration so i am planning on making a hump pack sort of pack with that 7th cell ontop

[z400]

you want them as close to the bottom as possible.

and no the wont fit in that configuration.
You are going to be very low on room from what i can see.
you mounted that motor mount a little too far forward for 2 7 cell packs

[eclipse]

i did do packs before for my rustler i know how to make them fit lol.everything is going to fit i made sure befor the motor mount was even glued in.that place is the closest to the bottom i can get them.btw man your the best ever you help me alot.i no your saying im doing things wrong becouse you know and i dont and thats exactly what i need from everyone.its making me better for building boats in the future.thanks i apreaciate you alot

[z400]

So what did you use to glue down the motor mount?

[eclipse]

epoxy

[blastoff]

What kind of epoxy ??? Oh ya, LOL

[eclipse]

first page bottom under got some goodies lol

[blastoff]

lol

[eclipse]

is that what i should be using?

[fastbaltek]

see... you ARE going to cut into the hull. WASTE....

[blastoff]

lol