Shockwave 36 FE Rebuild

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lenny
    Fast Electric Addict!
    • Sep 2010
    • 4293

    #61
    Well I put a leopard 4074 1800kv in the shockwave, To replace the bent shaft on my feigao 9xl 1898kv motor.
    I wanted to try the t600 1400kv in it, But I need to find or make a water cooled mount for it.
    I will try 4074 in it tomorrow and see how it does and maybe some video to of it.
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

    Comment

    • Bullwink
      Senior Member
      • Oct 2011
      • 244

      #62
      Hey, did you put the 4074 in and run it?

      Comment

      • lenny
        Fast Electric Addict!
        • Sep 2010
        • 4293

        #63
        Hey whats going on,
        Yes, Got it wet today and all temps were good.
        But my speed is down and I am not sure why, 32 mph gps.
        Timing is set 7.50 for the 4074 1800kv, Ran 4s2p 25/35c 5800mah with a x445 prop.
        That is what I have bin running with the 9xl and got 40 mph.
        I wanted to try the t600 1400kv, But need to find some motor bolts a water cooled motor mount for it.
        Have you run your again ?
        ? ONLY IF THEY WORK

        My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

        Comment

        • Bullwink
          Senior Member
          • Oct 2011
          • 244

          #64
          The OSE Speed Calc says you should get 33 mph but it is strange that a motor with the same KV got you 7 mph faster. I am still learning about timing. I was running my Pursuit P Mono with a 4082 2180kv at 11.25. For the last two races today I advanced it to 15 and it seemed to run faster.

          We had our monthly club race today so I have not got a chance to run it. I finally got my EKOS ESCs working last night, I have to put some vacuum caps over the stuff tube at the motor coupler and then I will be able to run her. I put it in my pool and just bumped the throttle. Wow! is this thing going to be fast.

          Comment

          • lenny
            Fast Electric Addict!
            • Sep 2010
            • 4293

            #65
            Hey,
            Whats up with the shockwave ?
            Make any headway on it ?
            I ran mine today and my rudder flipped up on it,
            But lumped it in, I think I hit a big fish with it.
            It happened two times to me.
            I am running with one bolt in the rudder, To save the transom and rudder.
            So be careful of sea monster.
            ? ONLY IF THEY WORK

            My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

            Comment

            • Bullwink
              Senior Member
              • Oct 2011
              • 244

              #66
              Hey Lenny,

              I have spent the past few weeks getting ready for our last race of our season, which was held today. Yeah, here in AZ, we don't race in the summer - too hot. It's our version of winter.
              Now that I am done with racing for a few months I will just do some enjoyable sport running wit the Shockwave on top of the list. I have several different motors to try on it.

              I hear you about the Sea Monster. I have been running in a straight line and all of a sudden, I hear a WHACK and my boat flips. Our monsters here are turtles usually.

              Next time I run the Shockwave I will let you know how it goes.

              Comment

              • lenny
                Fast Electric Addict!
                • Sep 2010
                • 4293

                #67
                Hey,
                Just a heads up on mine,
                I tried the boat with the air dam off at high speeds and I think it was little more stable.
                I ran it in some good chop and so far looking pretty good to,
                Also I moved the timing up to 15* on the leopard 4074 2200kv,
                And got 39mph with 4s2p 25c 5800mah packs and a x646/3 prop and temps were good.
                ? ONLY IF THEY WORK

                My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

                Comment

                Working...