MHZ Mystic M 1140mm build

[Espresso]

Nice to see another big genesis in the works. Hopefully this will hit the water with some videos. What electronics and hardware does it come with stock? Any more pics? Btw, how much did it cost from China?

[nata2run]

Got her out this morning with the new adjustments, way less jumpy and kinda stable. No idea of speed as I didn't have gps installed doc may have some vid?? Its definetly getting better.

[nata2run]

Could not resist!!!! 1380mm (54") MHZ Mystic Carbon/Kevlar plus hardware on its way. I will ofcause start a new thread for this project.

Hoping for good weather on the weekend to set some new records. Really considering 8s. got rid of the hopping but need the power/props - (this babe is still for sale)

[Espresso]

It's only money, you'll make more. The MHZ hulls look beautiful with all the scale features build into the mold. What motor will you power it with? I'm sure this build will set you back a few pennies.

[srislash]

Could not resist!!!! 1380mm (54") MHZ Mystic Carbon/Kevlar plus hardware on its way. I will ofcause start a new thread for this project.

Hoping for good weather on the weekend to set some new records. Really considering 8s. got rid of the hopping but need the power/props - (this babe is still for sale)

Are you going to have to buy a new house to hide it in?

[nata2run]

HA!!
You guys are funny :)
Its more like, I get this and can't move for the next decade LOL

Plan is:
Lots of custom carbon and hi-gloss polished aluminium/steel. Something cool hopefully.
I still have x2 Brand New LMT 2250/8.5 Wye or 2250/5 D - so they will go in for sure maybe on 8s or 5-6s
Will use SF250HV ESC's for now
There is not alot for me to buy atm as I have most of the parts and can use my lipo packs as well.
Will have to get a nice paint job for sure. Not fussed if this is fast, but should be ok.

[bruiser77]

Honeycomb motor mounts????? :)

[nata2run]

Honeycomb motor mounts????? :)

well, I was thinking more Carbon/Aluminium "more of an angle/L-bracket mount" rather then around sponsons. Similar to Christians Golddigger, but maybe more aluninium.

baubericht_hpr_135_christian_397.jpgbaubericht_hpr_135_christian_407.jpg

[bruiser77]

That was my original plan for mounts on my boat, very clean look! Should be a beauty Nata!

[nata2run]

Hey bruiser, any reason why you didn't? Use the mounts? I think if done right you have more control on angle and stuff. And if not happy it should be easy to screw in a new mount.

[nata2run]

Took her out again today. Had an idea about the COG to get rid of the hopping - COOL!!!! installed Doc's 5518/3 (Well mine NOW no giving them back!) and off it went. not a high top speed (just over 107km) but boy! it got there fast. Got a good 6min out of it, with components about 40-45c (warm, far from hot) sounds like big props for the 1717's but they were great fun and worked. couple more adjustments and should be really good. HOPE the DOC can get some vid uploaded.

http://www.youtube.com/watch?v=DXLEPOT_Dhw&feature=youtu.be

[drwayne]

MHZ C5000 1140 http://youtu.be/DXLEPOT_Dhw
TYFL Genesis 1422 http://www.youtube.com/watch?v=cY7T5IKk_3A

[nata2run]

Hello, took her out again today with the Doc. oh man.... she is getting really nice on the water (I hope doc agrees) but I got excited 107.8km/h with the CNC 4818/3 on 6s. by the look of it could be the most speed I will get on 6s running nice! "Doc has vid" next step definetly 8s just to get some RPM.

[srislash]

I have someone on the FC board that pulled off 8s with the 1717's in a Fantasm.I think he said he ran the 4816/2's.Unfortunately he was new to this and didn't put any doublers in and... He has work to do now.
Can't wait to see the vid.

[nata2run]

This link should, she was really good fun today http://m.youtube.com/#/watch?desktop...vK8GHL9k&gl=AU