MHZ Mystic M 1140mm build

[drwayne]

[srislash]

Looks to me like there is someone else other than myself who needs a bigger body of water to stretch the legs.Looks great.I would still try some 50mm 1.8's.

[nata2run]

Looks to me like there is someone else other than myself who needs a bigger body of water to stretch the legs.Looks great.I would still try some 50mm 1.8's.

Hehe, next will be the big lake around the corner!!! (thats for my Mystic138 54")
Shawn, do you think the 5018 will do much over the 4818? should be very minor no? couple of mph?

[cyprus31]

Got her out this morning with the new adjustments, way less jumpy and kinda stable. No idea of speed as I didn't have gps installed doc may have some vid?? Its definetly getting better.

Nice to hear that Kent. What adjustments did you do to have it less jumpy and more stable o water?

[nata2run]

Nick buddy! Just play with battery placement in my case 3cm forward she's dead stable now just flys

[srislash]

Hehe, next will be the big lake around the corner!!! (thats for my Mystic138 54")
Shawn, do you think the 5018 will do much over the 4818? should be very minor no? couple of mph?

I'm not sure Kent,There is also 52mm and 55mm at FC.
I'm still just playing with what my 4083's will handle.The big 1717 boat awaits a hull choice yet.AND TIME,been busy at work.
Going to look into the R42 a bit more http://www3.telus.net/acboats/cats.html

I just played with the speed calc and it would only be 3-4mph.Running 7-8 s however... 100mph with your 48mm props

[nata2run]

Now 100mph in the little pond is just a scary thought. R42? What happens to HPR or MHZ?

[srislash]

Just going to look into it.Supposed to handle awesome.We'll see when I see it in action.The maker,Andy has invited me out to check it out(in gas form).

The HPR is out for sure.Just too much $$ and don't like corners.

[nata2run]

Hehe you should join the 54" plus cat club.

[boddenboys4]

I've run the twin 1717s on 8s in the fantasm twice now and they did great. Transom did great after double carbon fiber plate and carbon Kevlar in and out, motors are really torquey. Videos coming soon.

[nata2run]

I've run the twin 1717s on 8s in the fantasm twice now and they did great. Transom did great after double carbon fiber plate and carbon Kevlar in and out, motors are really torquey. Videos coming soon.

Definetly looking forward to see that.....

[boddenboys4]

Here's the link to the Fantasm running twin 1717s on 8s with X450 props, go to 2 mins in and you will see the Fantasm.

http://youtu.be/m-LxDSn_FFY

[nata2run]

That looks fast, any idea of speed?? how did the components come back, hot??

[bracka69]

Hello Kent.
It gps 79.4mph and motors and esc's were barely warm.

[nata2run]

oh wow, potential to go fast then, maybe with the 4818/3 around 90mph will check that for sure