HPR06 - Austrian Build

[rc2266]

[RaceMechaniX]

Stunning paint Manuel.
Tyler

[tiqueman]

Amazing Manuel, just amazing. Your "two hatch" idea is one I though of doing as well. I love the scale appearance of the see thru windshield, yet was too worried about installing it for running purposes. I would like to do another hatch for when its on display, scale looking, with drivers...

[Rumdog]

unreal..

[norbique]

beautiful!

[Punisher 67]

Very very nice build and detail Manuel , Where did you get the little metal hose clamps can you post the link please

Thank you

[jb1234]

How do you mount the bullet connectors to the hull for the "not aus"?

[LarrysDrifter]

Amazing! One wouldn't expect a China powertrain in an HPR, but they run great. Awesome job Manuel. She looks good with the Outerlimits paint scheme. Your build gives me much needed motivation for my builds.

[ManuelW]

Hello Guys,

big thanks for the nice replys!

@ Punisher: I buy them at my local hobbyshop or here:

http://shop.lindinger.at/product_info.php?products_id=11800&osCsid=1ec4293b505c51660ab5118cae035ba4

(Maybe ask Steve from OSE if he includes them in his shop, I like these very much!)

@ jb1234: First I glued the two female bullets to a 1mm piece of GFK sheet and then I glued the complete sheet with the two female connectors to the inside of the hull that the connectors are on the same level as the outer surface of the hull. For the glue I used epoxy resin like I use it as glue for everything inside my boats.

Best regards,
Manuel

[johnf]

That is just awesome. Great work.

[millzee]

stunning paint work, excellent stuff.

[Fast One]

Very cool looking boat. Well done!
I just have a question about the rudder you have used? Can you measure the size of the mounting pod bracket? I may need one for my cat hull but need to have the exact measurement to see if it will fit the pod on my cat, In mm if possibile.
Thank you Shane.

[westbeach]

It is about 23mm wide by 23mm high.

Very cool looking boat. Well done!
I just have a question about the rudder you have used? Can you measure the size of the mounting pod bracket? I may need one for my cat hull but need to have the exact measurement to see if it will fit the pod on my cat, In mm if possibile.
Thank you Shane.

[HYDROJERRY]

frickin sweet build,,what is the black looking glue you used to mount in everything and how did you glue in the nuts to screw down the hatch????

[ManuelW]

Hello Guys,

thanks again for the comments, maybe I should make some photos when I run the boat again and post them here.

@ Shane: As far as I remember 25x25mm but I can measure it for you when I'm at home again.

@ Jerry: I use colored epoxy resin, also used it to glue the nuts for the hatch lock. There are many different colors available, you add 2-5% to the mixed resin and it will have the desired color. You may visit this thread: http://forums.offshoreelectrics.com/...t=21765&page=2 and look at post #55. In that HPR C5009 I used blue epoxy resin color!

Best regards,
Manuel