-
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
-
I have an x-452 from my osprey build if your interedsted.Comment
-
Hmmmm.............Sharpened, balanced...etc...............how much? Thanks!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:
http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Sharpened and balanced by me. I'm no "eggneg" But I do have a nice balancer and a good set of files. I've already run this prop a few times in my 40" osprey. It runs real smooth. I'd only ask $15/shipped. LMK!Comment
-
The 1717 continues to amaze
Well..............the x450 is the "cheese" for this hull...........
Missed 60 by a HAIR..................59.4. A little windy so i should get my big 6-0 on glass!!
I'm pumped........this 1717 is a PIG!!!NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Nice !"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Thanks Rearwheelin'! Had a couple of other forum members there btw to "witness" it since no vid................temps on motor 92*, ESC 101* and batts 85*, ambient air temp 68*
This motor continues to amaze.......................heck, it may take an x452
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Perfect setup ! What was temps before you started......Its so hot here where i live in the summer that I am allmost screwed before I even get on the lake....lol...I pre cool with ice water using a weed sprayer now
"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Do you mean air temp?...................68* if so..............NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
Air temp is usually close to ambiant temp depending on how long its been sittting out side in the shade...lol, I was just curiouse to how many degrees everything went up....Its in the 100's alot durring the summer here and from some of my setups that have worked for others in cooler climates don't last too long here when its hot out...lol....I think yours would fly here, I would still pre cool with ice water though..........."Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
Are you in Bakersfield, or near there???NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=Comment
-
I go to Bakersfield to run.....I am about 30 miles wesr with no water to run on.........There are only 2-3 pond I can use in Bako.."Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
--Albert EinsteinComment
-
I love it!
this is like my Thundertiger OBL and I have this motor going into that hull
looks like I'm going to start with a 50mm prop
.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8sComment
-
That's really good news. I suppose it is with the T-180? Very good!Twin Cat 135, Sprintcat40 (single-twin), DF 35", Maritimo, Mean Machine, SV 27
http://www.rcfastboats.com/Comment
-
DF Mono
Would like to see the DF39 with the castle against mine DF35 with the NEU 1527 1.5D...But i live so far away from there
Best Regards
Comment
Tweet
Comment