Tweet
Thats a sweet cat.Id use the wheely pic for your avatar pic.Where does one buy that hull?
-
-
http://www.swissmodelpowerboatteam.ch/index_en.htm. Hanspeter Rotchi is the man behind these beauties.
HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:
Comment
-
westbeach, I just noticed you have HPR115 x2 ?! How did you differ your two babes? what's your setups and speeds ? what's your CoG considerations? Sorry for so many questions, I just love the boat too much.
This Sunday I went to the lake again and had some more data. I was amazed how my Leopard motors ran efficiently, in both performance and cost. I did have a bit heavy runs and finally the ESC's LVC kicked in. My IR thermal gun reads 43°C on the motor and 41°C on the ESC, just slightly warm, very comfortable to touch, and that was right after 5 minutes of fast runs.
Comment
-
LOL...long story short. I traded 2 of my NEU 1521 motors that I had in my first HPR to someone who had a new HPR115 Carbon/Kevlar hull. My first HPR115 is regular fiberglass layup. Which is ready to go, but now needs 2 motors to finish. I was thinking of getting the Leopard 4090 in my first HPR. I have 2 Kontronik Jazz esc for my first setup. I would like to see how she handles, but I will have to wait for a while till I can get some motors that I want. I have not touched the Carbon/Kevlar hull. It is my backup hull. I want to experiment with this first one.
westbeach, I just noticed you have HPR115 x2 ?! How did you differ your two babes? what's your setups and speeds ? what's your CoG considerations? Sorry for so many questions, I just love the boat too much.
This Sunday I went to the lake again and had some more data. I was amazed how my Leopard motors ran efficiently, in both performance and cost. I did have a bit heavy runs and finally the ESC's LVC kicked in. My IR thermal gun reads 43°C on the motor and 41°C on the ESC, just slightly warm, very comfortable to touch, and that was right after 5 minutes of fast runs.HPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
Thanks for the link westbeach.There is some awsome stuff there!I have to have one!Comment
-
Where does the hull get water for cooling?Are there pickups in the bottom of the sponsons?I didnt see a water pickup in the rudders on the site.Comment
-
Water pickups are on the underside of the sponsons. I have the gps for my eagletree and the wires are thin enough that I run it out the back undr the top hatch and tape the wire to the hull to water proof it. there is enough room on mine if i slide the hatch all the way forward."Discussion is an exchange of knowledge; an argument, an exchange of ignorance." Robert QuillenComment
-
More pictures could be found here, ignore the words if they look too oriental.
They show the whole procedure of how I worked on the boat during last year.
My favorite one:
Comment
-
-
Himalaya,
Sorry the pictures don't show up on the linkHPR115 x2 ,Dark Horse Shovel, Delta Force CyberStorm, Delta Force Sniper 23-RTR:Comment
-
Sorry, looks like the pics are only visible for logged in members, same as here in OSE forums. I was just trying to save Steve some MBytes on his server's hard drive.
Well I will upload it again here. but that's over 100 of pics.Comment
-
Now does these links work:
Build procedure:
The debut run:
Comment
-
hi, i have a 115 in full carbon... i can get a gps signal through it, although my antenna one i have to get outside the hull
and no, them links don't work for me.Hpr 06 / 09 / 150 /185, Mhz Skater H45 hydro.
Uk SAW record holderComment
Comment