hpr ct04 67 inch cat build

[Paul21]

not sure how many i can post at a time so doing only four

[Paul21]

getting old i guess paint no like i wanted so sanding off and redoing so all i need r two can cooler for motors one more esc batts and figure how to get x457 on a 1/4 inch shaft tried to drill bigger messed it up so now contemplating what to do about props as outdrive is hpr and am not cutting down to 3/16 want it to stay 1/4 so will have to see about ordering some alrdy drilled for 1/4 also waiting on reverse 1/4 flex cable none in stock for while well thats it for now tks all who have check it out figure leave somthin for son to look at when im gone

[Paul21]

hi all im back had little trouble for while . i just ordered last esc and water jackets for motors also props . wow i had to read whole build again to catch up to where i was lol question my drives are 1/4 inch so instead of being able to get the x457 props i bought the abc 2616 left and right hand 3 blade hope it wont be to much for motors which are 5692 740 kv i read somewhere about detounge prop to relieve load if i find the props to be to much wonder if that would help
excited caint wait for stuff to get here so i can finaly finish and make a test run and tks to all for input in the past

[Paul21]

well got the last esc and motor water cooling cans in from offshore electrics and i have to say super fast delivery thanks to you at offshore electrics . setup went well test boat today only on 6s that all the batts i had need to order some outa money next month . also the test lead to issue with how to lock down the coupler from motor to flex cable as i know i tighten both and both slipped put in a new thread for any help but i am excited the abc props apear to be a good start caint confirm as couplers started slipping but the first run on 6s full throttle had real good speed so if i can fix coupler slipage when i do 44 volts she should fly boat seamed to hanldle real well hans peter build real nice hull didnt get video was alone for test it was cold and just wanted to check it out so will work on fix issue and next month make another run this time with a friend to video thanks to all for help in past . oh the swordfish 300 pros worked great but when i got home could not get data to upload to pc sent a email to hifei just thought i throw it out if anyone else had this issue i can connect to esc and laptop i can access the setup of cells and so forth page but when i do the data page and set pole to 4 and hit upload the hifei program freeze with error say to contact hifei now before i made the run i did a test on the old esc i bought over yr ago and i could download and see graph since i used the same program to program the newest esc now neither will show a graph get error and have to close the program kinda wierd any input would be apprecieated but as far as setting up the esc to motor they both work fine just that the data logging is issue oh i use version v.02 i recieved a new disk with the newest esc but figure if v.02 work with older one should work for newest it did but now neither will data log or at least wont let me upload it and i have them set to non reverse maybe i need to set to reverse need to read up on that a bit well thanks for now

[Paul21]

hi was trying to upload the short video of boat running on 22 volts but it is mp4 file anyone know what i need to do to upload mp4 media player file to this thread

[Paul21]

try this link see if video works

http://youtu.be/xrp4JHjTr18