Tadpole 10" Micro Rigger

[j.m.]

The whole idea was to have an incredibly fast pool racer for under $100 minus radio. This includes motor, esc, and battery.

Im debating whether to sell these as little kits, sell the hull mostly assembled, or just put plans up. Either way I am going to be testing all the hardware and setup options so the gueswork will be gone.

I have the two sides on the hull and the sponsons have been cleaned up. I may do a little more work tomorrow and finish skinning the sponsons, but I have to write a paper so I may only work for an hour. I'll also be stopping by various bike shops to see if I can find stainless spokes without having to buy a 500 or 1000 pack.

Jon

[Chuck E Cheese]

ok, i got my $100 check filled out and ready to send..

[j.m.]

FINE.

I'll work a little on it, but i have exams next week. After that im free though.

The motor, esc, and battery come in at 2.4 oz. The hull so far is about .75 oz, and I suspect to add another 3.5-4 oz to that. AUW should be around 6-8 oz.

Jon