Skippies and Kiwis

[ozzie-crawl]

andy you need to get liitle duck skull stickers with cross bones threw it,one for every duck thats fukced.
jees paddy that rigger looks fast,just hope it doesnt think its a plane and take flight

[andym]

Thats not fast mate. Just wait till I am finished with his BBY rigger , then you will see some speed young Ozzie..........................................

[ozzie-crawl]

i know what speed is andy i live on the gold coast, drug capital of qld

[Xzessperated]

andy you need to get liitle duck skull stickers with cross bones threw it,one for every duck thats fukced.
jees paddy that rigger looks fast,just hope it doesnt think its a plane and take flight

ozzie I purchased this plane from Andy's twin cousin in Hong Kong (Mr Li Po). It comes with a wing and will fly if you add the wing. A very clever new invention and could only come from Andy's family. You can also drive in on the road and use is as a remote control car if you take the sponsons off and add the wheels supplied with the kit. Damn smart people Andy's family.

[Xzessperated]

A 200 amp esc you guys might be interested in (not suitable for Tug Boats). Looks half descent.

http://www.aquaboat-rc.fr/pulsonavy-200a-p-48.html

[ozzie-crawl]

yea it goes under a few names,there huge esc

[Xzessperated]

yea it goes under a few names,there huge esc

My Hydras have a few names too but they are not allowed on OSE.
My Eagle Tree logger can not measure the amps my boats draw either.
If I can get my son off his lazy a$$ and get him to start building an esc that will allow 500 amps to pass through it I will be a happy man. I wish I had his brains and my common sense. Before you comment about my common sense Andy the answer is "get stuffed"

[Flying Scotsman]

A 200 amp esc you guys might be interested in (not suitable for Tug Boats). Looks half descent.
http://www.aquaboat-rc.fr/pulsonavy-200a-p-48.html

I have the Turnigy 200 amp monster esc and it looks similar but has different caps and heat sink, it is a great esc.

Also it does not require water cooling!!! due to the very large heat sink.

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=10332&Product_Name=Turnigy_Monster-2000_200A_4-12S_Brushless_ESC

Douggie

[ozzie-crawl]

I have the Turnigy 200 amp monster esc and it looks similar but has different caps and heat sink, it is a great esc.

Also it does not require water cooling!!! due to the very large heat sink.

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=10332&Product_Name=Turnigy_Monster-2000_200A_4-12S_Brushless_ESC

Douggie

no it doesnt need water cooling because your tugs only pull 5 amps

[Xzessperated]

I have the Turnigy 200 amp monster esc and it looks similar but has different caps and heat sink, it is a great esc.

Also it does not require water cooling!!! due to the very large heat sink.

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=10332&Product_Name=Turnigy_Monster-2000_200A_4-12S_Brushless_ESC

Douggie

Douggie I was debating with myself about buying one of those or the Turnigy 180. I got the Turnigy 180. Andy said the 180 will not do the job that my Hydra 240's have done. How would you rate the Turnigy Monster 200 against the Hydra 240?


ozzie he might only be using 5 amps with the Tug but he likes to have a bit of a safety margin

[Flying Scotsman]

Don't know as I have never owned a Hydra 240. I also just received a Turnigy 180 Marine for my new Insane hydro and it shipped today a nice red one!!!!

Douggie

[ozzie-crawl]

what you going to call your new hydro douggie "tugger" here is douggie as russel crow http://funny-videos.co.uk/videorussl...html#embedcode
in all seriousness tho,looking at them new hydros yours should be a screamer with a 1415 1y

[Flying Scotsman]

The only problem is Master Crowe has not learned the fine art of a head butt...par for the course for colonists.

Paddy my Turnigy 180 Marine is the version with higher burst amps...360

Douggie

[Xzessperated]

The only problem is Master Crowe has not learned the fine art of a head butt...par for the course for colonists.

Paddy my Turnigy 180 Marine is the version with higher burst amps...360

Douggie

Yes mine is too Douggie. I am hoping that might keep it from going up in flames. I run WOT for about 3 seconds and then turn the boat around and run WOT for another 3 seconds. The boat then sits on the bank for 3 or 4 minutes before the next run. If it works I will be very happy.

[ozzie-crawl]

if your just doing short runs then letting them sit paddy,maybe a high amp esc with just a fan maybe better,as the fan will still cool when stopped. i ran just fans on some 200a himodel
esc,s for awhile no water cooling,didnt seem to be much in it over water cooling but there was less heat soak and the esc cooled much quicker when stopped.
i also have tried pumping water threw the system while stopped,this drops temps really fast as well.