Hobbyking Hydropro Inception (Joysway Alpha 1000)

[wade1992]

Hi
I recently bought a joysway alpha boat and have removed the flex shaft to clean and some bearings came out. Wondering if i could get some help reassembling the rear shaft/prop support. Any ideas how it goes back together? Cant find anything on the internet.

IMAG0659.jpg

[martin]

Were all six of those bearings fitted on the shaft or were some spare ones.

[wade1992]

I assume they were all in the shaft, as I only had 4 (1 flanged, 3 normal) when I took it apart and ordered a new set which came with 6 (4 normal, 2 flanged), so I lost 2 in the process. I have put it back together the only way I could but had to leave one of the flanged bearings off so the gold prop coupler could be secured in the right place on the flex shaft.

[martin]

I think you will find it uses 4 bearings ie 2 plain bearings back to back at the front then the black plastic spacer then a plain bearing back to back with the flanged bearing at the rear. I think they include 2 spare bearings 1 plain + 1 flanged, as the rear 2 bearings wear faster than the front 2 bearings due to the side load put on the rear 2 bearings.

[steve p]

that is good that the boat has all that how much do you want for it: send quote to :sboatman 429 @gmail.com
thanks,Steve

[fweasel]

that is good that the boat has all that how much do you want for it: send quote to :sboatman 429 @gmail.com
thanks,Steve

I don't believe anyone is selling anything in this thread.