56-102 Monster coming down the pipeline

[Brushless55]

wow, that's almost $250

[RIPFENCE]

oh yeah its in euros

might still get one though

[Brushless55]

$92

[RIPFENCE]

awesome...who would of thought castle monster motors would appear to be wimpy in size comparatively?

[Brushless55]

awesome...who would of thought castle monster motors would appear to be wimpy in size comparatively?

any one need a CC1717

[znus]

Got the Sky RC Proteus X524 from Keith today. It's huge! Huge!!

Here compared to a Leopard 5692. Of course the Proteus is closer to the camera but still...

IMAG0366.jpg

[ray schrauwen]

I use the same motor mount in my 40" mono. It is limited in cooler size unless modified.

The coolers on the 512 & 524 are too long for that mount.

[Brushless55]

Got the Sky RC Proteus X524 from Keith today. It's huge! Huge!!

Here compared to a Leopard 5692. Of course the Proteus is closer to the camera but still...

[ATTACH=CONFIG]84542[/ATTACH]

Yeah your right... To close to the camera.
Makes the motor look WAY bigger than it actually is.

[gerardobrandao]

Mello

Im waiting for mine too....would like you to give me some impressiona of it... i guess imnot the OnLy OnE expecting that...since most of us are looking forward to it...when do you expect to Test it??!??!


Best regards

Sent from my ASUS Transformer Pad TF300T using Xparent SkyBlue Tapatalk 2

[znus]

I use the same motor mount in my 40" mono. It is limited in cooler size unless modified.

The coolers on the 512 & 524 are too long for that mount.

Thats good to know. I use the http://southriverrcboats.com/ rail mounts in my monos. They are two piece, front and rear, and lets you build the way you want. I think the jacket will come off and be replaced by something that doesn't leak anyways. An o-ring change to something fatter will probably fix it.

@gerardobrando. If that question was for me - I wont test it until next spring. Too much on my table right now (boats, that is...). It will go into a 42" mono. I'll run it on 12s on a SeaKing 130A HV from Steve and try som gasser props. I think it'll spin a ~67 mm without a hickup

[keithbradley]

Znus,
Yours leaks? I tested a few of these to a decent pressure and they were fine...if yours is leaking I guess I will have to go through all of them. If there is a problem I will get it resolved.

[keithbradley]

heres another sirius motor but it does not have the adjustable kv...looks awesome as well..mhz has some stuff specifically made for them sometimes so maybe its only a one off..am thinking about getting one..beastly!!!

http://shop.mhz-powerboats.com/categ...--1-150KV.html

I'm not sure how you meant that, but the motors in this thread are not made by Sirius...
Sirius makes the purple motors I sell...the Proteus motors aren't from them.

[Punisher 67]

I wont test it until next spring. Too much on my table right now (boats, that is...). It will go into a 42" mono. I'll run it on 12s on a SeaKing 130A HV from Steve and try som gasser props. I think it'll spin a ~67 mm without a hickup

You are a brave man using a 130 amp esc on a 67mm prop and on 12s......................

[Doby]

Agreed Peter:

Kinda reminds me of an old song from the 50's (I think)...

Kaboom kaboom...shannna shannna, kaboom kaboom....shannna shannna Kaboom!

[Steven Vaccaro]

Got the Sky RC Proteus X524 from Keith today. It's huge! Huge!!

Here compared to a Leopard 5692. Of course the Proteus is closer to the camera but still...

[ATTACH=CONFIG]84542[/ATTACH]

How about a side by side picture. Arnt they almost identical in diameter?