Littlescreamers 63mmwater jacketed Motor

[justintime2w8]

Ok this is a real dumb question, But how many people are running 1/4" flex with these 63mm motors. Or 3/16"?

[Ub Hauled]

Ok this is a real dumb question, But how many people are running 1/4" flex with these 63mm motors. Or 3/16"?

if you are running anything on 10s you should be running 1/4 flex...
the prop shaft is a choice between 3/16 (more prop choices) or 1/4 if you
know what you are doing with big props.

[Jeff Wohlt]

Cables

Can anyone tell me the shaft length when running these big set ups? I will be making the 1/4" cables with a step down 3/16" stub end and std 1/4" shaft soon. I guess I should know the length as well for most set ups.

These will be silver brazed.

[Ub Hauled]

Jeff,
I think it will depend on the strut one uses... I use the standard, 1/4 cable w/step down to 3/16
that I got a long time ago, if it still the same it is 4" long (just stub)

[s.sm.21]

info

Scott is the motor mount braket proboat or did you make it and will it fit in a magnum 57 warehouse hobbies v hull,if so what it the proboat stock numbers for the mounting braket hardware.Nice

Ok
I have a little more info on the motor.

This Large Water Jacketed Outrunner was designed for big boats 40-90". It will perform well as a drop in HP replacement for the Weed Eater type gas boats. Designed as a racing motor to run against the gas and will be competing in the racing scene beginning 2010. Testing so far in a 40+ Race hydro we are running 65-68 MPH and completing 7+ laps on 10s. This is very exciting for a low cost alternative motor to be running with the $600 Modified gas motors and the Large Neu inrunners. Testing continues and I will update soon!

These pictures are from the 55" Deep Vee I am doing a conversion on. I started with a new hull (Snagged from the LHS for $50 new in the box) and then bought all new Proboat hardware, I am waiting on an ESC and then I will finish this project. I am very excited to see this thing scream across the lake with the new power system.

Order one from Littlescreamers.com Today

KV650
Shaft 8mm
Watts?? 8,000


Scott

[cybercrxt]

Let me just say this, lol. I just got my Little Screamers motor in the mail today, haha, and there is not a damn thing "Little" about this motor! Its going to push around my 1/8th scale hydroplane project like its a joke! It has 8 gauge wires coming out of it! Mike

[blackcat26]

Would this be a good choice for a 10th scale hydro? Or is this waaaay too much motor?

[cybercrxt]

Holy crap, no way to much! This motor is as big as a Coke can!

[RandyatBBY]

Would this be a good choice for a 10th scale hydro? Or is this waaaay too much motor?

It is way too much motor for a 1/10 scale.

I am wanting to do a test and see if it can be run on a 3/16 shaft. 3/16 flex are pretty stout might make it. I am going to run one on 8S and see what is will do in a 45 inch cat.

[blackcat26]

Thanks guys I figured it would not. Guess I was just hoping, since they are a cheaply priced power source.

[bvincent]

Not "cheap" :) "inexpensive"

[blackcat26]

LoL...Yeah. That's what I meant. This motor makes me want to build a gianourmous boat around it!

[justintime2w8]

Or an even more gianormous boat around two of them. LOL

[bvincent]

Right on Justin !! I have a surprise for Rad that came in the mail today "They" will make that Ginormous boat haul booty!!!!!!

[bvincent]

Hey Justin,
I just noticed the website link on your post You guys are "out" now huh? SWEET!!!!!! Now we can put a link on our site to yours too