Tweet
I hope the good news about this motor continues! I have sworn off Feigao motors due to failures and my budget won't accommodate very many NEU motors. The pricing is great for this Leopard motor!
-
Mini Cat Racing USA
www.minicatracingusa.com -
-
Great feed back!.NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s
Comment
-
Ran my 4074 with 5s2p 3200 venom lipos, x640 prop 2 deg timing, pwm 8k, strut .25" from bottom, about .5 degree angle up on prop end, 51 mph on radar gun (brother was manning that)
temps were good around 120 -130 on caps, 115 on motor shaft. Ran it 3 times about 2 min intervals and the motor got to 150F on the last run, not a surprise seeing as i ran it wet! 4s seems to be the limit but with a little tweaking i think i could run 5s
24 R/C vehicles and still counting...What budget?
Comment
-
I ran the above setup a few more times and the hottest anything got was 125F, that includes the motor. It turns out the motor got to 150F because i had a clog in one of the lines. The amp readings are still spiking in the 180s but averaging in the 136 to 153 after the initial spike. I am really really impressed with this motor and for only $90
i would strongly recommend this motor to anyone on a budget for speed! 
24 R/C vehicles and still counting...What budget?Comment
-
Should be fun to see what we can do with the 5692's when Steve posts them up.
I know they can be had elsewhere... Nortavlag Bulc Comment
-
What esc are you running? Im afraid to get that aggressive because Im only running a Swordfish 120...Comment
-
I will be running a Monster 2000. I have added cooling tubes to and put Conformal coating on it to keep water out. Runs fine on the bench but, I need to get it wet to see how it performs.... Nortavlag Bulc Comment
one of the 1000Kv units please....
Comment