Tweet
Selling my 2230 1Y 725kV motor. $400 + Shipping Edit: NEW PRICE $300 shipped mainland US only
Can add water cooling jacket and 5" rail mount for extra $30
Pictures of the jacket are here: http://forums.offshoreelectrics.com/...ead.php?t=7827
The motor may need new bearings in the future. They are getting a little noisy, but not loose yet. Last time I ran it in my boat, it ran fine. I always used pressure bearing with this motor (not included). Motor shaft is cut a little shorter than original, I did that so flex cable coupler can be placed closer to motor's case. The shaft is 24mm long from motor case to tip. It fits Lehner 8mm to 1/4" aluminum flex shaft coupler and OSE 8mm pressure bearing perfectly. I got that coupler from Chris Fine at Fine Design Marine, but don't know if he still sells them. I took mine off this motor to reuse it. It needs to be heated with a torch (not too much, don't let grease on the threads smoke) to slide on and off this motor's shaft. Motor has OSE 8mm connectors soldered.
Selling it because I want to use smaller 2215 2Y motor. It is half the weight of 2230 and should push my Thunderbolt hydro fine. I originally bought this 2230 for extra power headroom, but now realized I am just carrying unnecessary weight. I wanted extra power to go above 70 MPH, but after crashing few times at that speed, my boat cannot handle this abuse. So I am shedding few pounds and going to stay at 50 - 60 MPH.
Can add water cooling jacket and 5" rail mount for extra $30
Pictures of the jacket are here: http://forums.offshoreelectrics.com/...ead.php?t=7827
The motor may need new bearings in the future. They are getting a little noisy, but not loose yet. Last time I ran it in my boat, it ran fine. I always used pressure bearing with this motor (not included). Motor shaft is cut a little shorter than original, I did that so flex cable coupler can be placed closer to motor's case. The shaft is 24mm long from motor case to tip. It fits Lehner 8mm to 1/4" aluminum flex shaft coupler and OSE 8mm pressure bearing perfectly. I got that coupler from Chris Fine at Fine Design Marine, but don't know if he still sells them. I took mine off this motor to reuse it. It needs to be heated with a torch (not too much, don't let grease on the threads smoke) to slide on and off this motor's shaft. Motor has OSE 8mm connectors soldered.
Selling it because I want to use smaller 2215 2Y motor. It is half the weight of 2230 and should push my Thunderbolt hydro fine. I originally bought this 2230 for extra power headroom, but now realized I am just carrying unnecessary weight. I wanted extra power to go above 70 MPH, but after crashing few times at that speed, my boat cannot handle this abuse. So I am shedding few pounds and going to stay at 50 - 60 MPH.
Comment