))DF SNIPER 45: Hull/ Hardware/ Castle 2028((

[T.S.Davis]

Is the whole nose full of two part foam? Like to see a pic of that.

Would you consider moving it less the motor?

I have on of these at the house but it's beat to death. This looks like it would require less work to go racing. Might be just the ticket for offshore in Atlanta.

[Pooley]

Is you separate whats the price for the motor ive got the same hull with a leo 5698 1100Kv im told ththe cc does better

[T.S.Davis]

I've got a big fat Neu I could throw in there.

Maybe we could team up or something. IDK. Struggling to talk myself into it. I have too many boats as it is.

[Leeandre]

I have a 56 series to 990 kv ,can it work with the existing motor mount ?

[T.S.Davis]

I have a 56 series to 990 kv ,can it work with the existing motor mount ?

Not my boat but you could likely swap out the motor mount without too much agony.

[T.S.Davis]

Plus if you bought then I wouldn't be able to. That's what I call a win/win.

[JMSCARD]

Plus if you bought then I wouldn't be able to. That's what I call a win/win.

Pulling from my memory of before I sold it approx. 5 years ago, yes the front of the hull is filled with 2 part foam... done properly.

the motor mount I originally had a NEU 2215 in it, it will pretty much accept any of the neu 22xx series, leopard 56/58's and castle 2028's.... in fact it looks like the rear hold down ring isn't tightened all the way down to hold the 58mm castle in it... which is fine, but means it should still fit the 56mm motors perfectly or a Neu 22xx series.

Just so you all know, this boat I bought brand new from Ray Fuller... of the two new DF monos I bought from him this one was the nicer built of the two, quite the tank, was bought of rumrunner many years ago, and don't think the boat has ever seen much use as I think I may have run it once lol.

[rcbidder]

Jason, thanks for chiming in, to help correctly answer the questions, I never ran this, since I took possession.
This is a solid hull and needs a new home.

[rcbidder]

Is the whole nose full of two part foam? Like to see a pic of that.

Would you consider moving it less the motor?

I have on of these at the house but it's beat to death. This looks like it would require less work to go racing. Might be just the ticket for offshore in Atlanta.

Rather not part out at this time.

[rcbidder]

Still for Sale.
Post all inquiries here on Thread, please no PM's.

[Bp9145]

Hi Joe, I just got home from work so now I can message you properly. So did you finally get the chance to run it? If you did what ESC did you use and do you have one by any chance? If you do what would you want for all . .RTR? Also I will assume nothing has changed with what is included in your listing right? I mean all I will need is what you said "ESC, Rx, Lipos, plus misc hardware(cooling lines, steering connection)"? If you don't have the an esc for it will you take $300 shipped. Also, I see the original servo mount/plate was removed. So the plywood with the servo in it is a perfect fit and all is needed is to glue it to the rails?

[rcbidder]

Never ran it/ No ESC/ Nothing has changed per original post, so selling per Post 1 thru 4/ Servo with Wood plate: need to glue and screw into place. Price: $345 shipped to FL.

[Bp9145]

how much for just the motor with cooling can, collet and the two props. . .that is if you are willing to part with them. .I'll even take the servo

[rcbidder]

how much for just the motor with cooling can, collet and the two props. . .that is if you are willing to part with them. .I'll even take the servo

Decided to Part Out, see original post for details.

[rcbidder]

Is the whole nose full of two part foam? Like to see a pic of that.

Would you consider moving it less the motor?

I have on of these at the house but it's beat to death. This looks like it would require less work to go racing. Might be just the ticket for offshore in Atlanta.

Decided to Part Out, if you are still interested in Hull/ Hardware +