fightercat super daytona

[iridebikes247]

Price $750

Hey here is a super daytona hull with most of the parts required to outfit it. Boat was ran for about 15 times, then I took it out off the water when I got my mystic 138 and I don't have time to rebuild it. The inlay is Keith Bradley Boats carbon fiber with west systems epoxy. The inlay is NEW, I ran the boat without an inlay and decided to stiffen the boat up so you get a completely clean, fresh area to work with no drill marks or anything. The bottom of the hull looks great, I recently repainted the bottom after filling the holes for the drives, so you can choose whichever drives you wish.

Hull details
carbon inlay fabic from KBB
Carbon fiber bulkhead seen in photos
Inside of transom plated with carbon fiber
Rudder area filled with carbon fiber and epoxy layering
Sponson tips each have 1 ounce of solid epoxy preventing a seperation in a hard crash
Hatch bolts drilled
The sidewalls were done with 1 layer of fiberglass tape, then inlay over making the hull extremely stiff

As you can see the paint looks great, I have also included pictures of the extra parts also included

OSE motor mounts for 5692 sized motors
MHZ oilers, cost $100 shipped
Stuffing tubes for 1/4"
Teflon tubing
Hughey C/R set 1/4" flex cut to 12"
Fightercat CNC 5518 propellers
Fightercat servo mount
Rudder installed works very well
Fightercat Drives 1/4"-Made for this boat, but don't have the top part so I'll just include these for free.
Hatch bolts
Spare Fightercat rudder
--As you can see a lot of time went into prepping this boat. The gloss is just beautiful and the paint is very recent there are no chips a few small scratches but nothing deep. The thru hull water cooling is also in place.

Price $750 shipped U.S.

[iridebikes247]

To complete this boat you need electronics, collets, water outlets, water tubing, and drives. The ones included in the sale don't come with the top part so I'm just giving them away to the buyer.

http://www.youtube.com/watch?v=wzYxoyH9dM4

--Here the boat is running on 11s1p on the maiden run, the trim wasn't set right but you can get an idea. Also the new rockstar stickers aren't in the clear coat you can remove them if you'd like to without harming the paint.

[iridebikes247]

750 shipped

[atechbh]

How long?

[iridebikes247]

56.5" without rudder is the true length. Requires a similar power system to an mhz mystic or hpr 135. Something like twin leopard 5692 730-1090kv with swordfish 240s

--I had plans to run leopard 5692 1340kv on 8s1p per side for this boat but am now building a SAW mystic 114 so this one has to go thats the reason for selling.

[george91]

Just wonding what it would cost to ship to Canada interested

[iridebikes247]

Ok I calculated the shipping to Canada would be an additional $20 so not bad, it would be shipped in a 59X15.5X9 box with about 1.5" padding in the fronts, 3/4" on the sides and 1" top and bottom. The other option is fedex ground for $150. I have gotten quite a few of these boats from germany in small boxes it would be packaged very carefully. so $770 and its yours, I absorb paypal fees.

[blowNover]

I'll take it.

[iridebikes247]

Boat is sold to blowNover, thanks again bud.