cheetah builds294.JPG DSC03602.JPG DSC03593-1.JPG
DSC03575-1.JPG DSC03592-1.JPG
SOLD
I built this boat for Cameron, but his local duck posse is now keeping him from running it, and because I built it and can answer any questions/details, He requested that I post it for him. The sale transaction will be between the buyer and him. I hope this is OK for me to do.
Details :
Fightercat 34.24" Cheetah widebody hull
Leopard 4082 2000KV motor
FighterCat carbon fiber motor mount
Castle Creations Hydra Ice 240A 8S ESC with datalogging feature
Speedmaster 60/90 dual pickup rudder
Speedmaster 60/90 .250 skeg strut stepped down to 3/16" shaft and uses stock Speedmaster replaceable bushing
9/32" stuffing tube with teflon
.187 Aeromarine flex cable with Octura 5mm to 3/16" collet
Traxxas Hi-Torque waterproof servo in OSE servo mount
custom carbon fiber battery trays
custom waterline guides
custom hatch retention anodized/knurled hold-downs
Octura X448 s&b prop
Using 4S2p 5000mah Dinogys the boat GPS'd at 57.1 mph and can handle propping up for more. It handles like a dream and carves turns far better than the narrower scale offshore cats.
The boat has less than 30 minutes runtime on it. FWIW after building this for Cameron I was so in love with the hull that I built one for myself nearly identically other than a 1900KV motor and a FCR 240A ESC {which unsoldered a board lead and now runs the old version Hydra 240 and a bigger prop - it totally rips with an X452 btw}.
I'm posting pictures of the boat during the build; first with a T-180 which was replaced with the CC240A 8S Hydra. My original graphics were changed by Cameron to his liking. (MonoJeff has a nice windshield available) A picture of the boat as it's now decorated is below as well
All that is needed is a Tx/Rx and batteries and you'll be up/running/jammin'
Price : $850 firm and purchaser pays shipping. Once agreed upon, I'll put buyer and Cameron in touch for transaction details
(see next post for picture of boat with the current graphics - could only post 5 pix on this post)
DSC03575-1.JPG DSC03592-1.JPG
SOLD
I built this boat for Cameron, but his local duck posse is now keeping him from running it, and because I built it and can answer any questions/details, He requested that I post it for him. The sale transaction will be between the buyer and him. I hope this is OK for me to do.

Details :
Fightercat 34.24" Cheetah widebody hull
Leopard 4082 2000KV motor
FighterCat carbon fiber motor mount
Castle Creations Hydra Ice 240A 8S ESC with datalogging feature
Speedmaster 60/90 dual pickup rudder
Speedmaster 60/90 .250 skeg strut stepped down to 3/16" shaft and uses stock Speedmaster replaceable bushing
9/32" stuffing tube with teflon
.187 Aeromarine flex cable with Octura 5mm to 3/16" collet
Traxxas Hi-Torque waterproof servo in OSE servo mount
custom carbon fiber battery trays
custom waterline guides
custom hatch retention anodized/knurled hold-downs
Octura X448 s&b prop
Using 4S2p 5000mah Dinogys the boat GPS'd at 57.1 mph and can handle propping up for more. It handles like a dream and carves turns far better than the narrower scale offshore cats.
The boat has less than 30 minutes runtime on it. FWIW after building this for Cameron I was so in love with the hull that I built one for myself nearly identically other than a 1900KV motor and a FCR 240A ESC {which unsoldered a board lead and now runs the old version Hydra 240 and a bigger prop - it totally rips with an X452 btw}.
I'm posting pictures of the boat during the build; first with a T-180 which was replaced with the CC240A 8S Hydra. My original graphics were changed by Cameron to his liking. (MonoJeff has a nice windshield available) A picture of the boat as it's now decorated is below as well
All that is needed is a Tx/Rx and batteries and you'll be up/running/jammin'
Price : $850 firm and purchaser pays shipping. Once agreed upon, I'll put buyer and Cameron in touch for transaction details
(see next post for picture of boat with the current graphics - could only post 5 pix on this post)
Comment