Leo 4082 2200kv/ Proboat motor,esc,servo/ 56mm WJ

[Jason4636]

Sold

[Jason4636]

Plus I have a sheet of CF/Kevlar orange and black fabric 16x26 for $25

[gettinbrushless]

Is the bearing easy to replace?

[larz001]

hi jason whats the kv on the proboat motor?

[gettinbrushless]

I guess what i mean is can i find a bearing? And change it???

[gettinbrushless]

hi jason whats the kv on the proboat motor?

Im pretty sure its lower than 1800 ?

[larz001]

im going to guess 1500 kv,, but am hoping 1800 or better

[dana]

You shouldn't need to oil bearings. I never do. I suspect something else is wrong. Did you run it on 6s?

[bracka69]

Your correct. The kv is 1500 for the Geico. The PB Mystic and new Black Jack 29 carry the 1800kv.

[larz001]

Your correct. The kv is 1500 for the Geico. The PB Mystic and new Black Jack 29 carry the 1800kv.

thankyou sir

[Jason4636]

Deleted

[Jason4636]

I bought the Leo from a guy on this forum. He was going to run it in a cheetah with a t180. He changed his mind and went with a HV setup. He told me he never ran the motor. And I've only ran it 2 times on 4s. When I bench tested it before the first run, it sounded fine. After the first run on 4s it had a little whine, sounds like the front bearing. Not sure? But it still runs fine. The last run out with a x642 the boat ran 53

[Jason4636]

Your correct. The kv is 1500 for the Geico. The PB Mystic and new Black Jack 29 carry the 1800kv.

Thanks for the info, Isis change everything over on the motor and esc to 5.5mm connectors

[Jason4636]

You shouldn't need to oil bearings. I never do. I suspect something else is wrong. Did you run it on 6s?

Just 2 runs on 4s

[gettinbrushless]

I really would like to get the motor?, but i dont get the motor noise?? I never had a brushless motor make a sound besides the norm!!