Matrix rigger fs

[steve-b]

Do you know if you can fit a turnagy 180 in that hull. my brother is looking for a rigger, and he only has that ESC.

Steve.

[rchippie]

Do you know if you can fit a turnagy 180 in that hull. my brother is looking for a rigger, and he only has that ESC.

Steve.

Hi Steve

The inside width is 3 1/4 inches wide. So yes it should fit just fine. All you would have to do is install the esc with the water lines facing the Nose & Transom of the hull. Here are the measurments for the 180 esc.

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8937&Product_Name=Turnigy_Marine_180A_Brushless_Boat_ESC

2.83 x 2.67 x 1.33 inches

[steve-b]

Thats great.
I will let him know... then i will let you know, hopefuly it wont take long and you still have it.

Thanks

[rchippie]

Thats great.
I will let him know... then i will let you know, hopefuly it wont take long and you still have it.

Thanks

I hope it's sold . No problem just let me know.

[steve-b]

Hi, i just now was able to get ahold of my brother. He is going to call me back in a half hour (his wife got hold of him first) He is going to have a look at your pics and decide.
Sorry for the wait. I hope he wants it.

Steve.

[rchippie]

Hi, i just now was able to get ahold of my brother. He is going to call me back in a half hour (his wife got hold of him first) He is going to have a look at your pics and decide.
Sorry for the wait. I hope he wants it.

Steve.

I hope he does too.

[rchippie]

Daily Bump .

[rchippie]

I will listen reasonable offers .

[manbug50]

will you ship to Canada?

[rchippie]

I checked with USPS. I will ship to Canada, but it will cost an extra $10.00.

[rchippie]

Morning bump .

[rchippie]

I have a possible deal on the hull & hardware. so the motor maybe available latter today. I will keep this thread updated.

[rchippie]

The hull is SOLD. Thank you steve.