Be sure to use an appropriate hobby grade epoxy, not JB weld.
Scuff the fiberglass up before gluing, and clean with denatured alcohol. The fiberglass appears to have a shiny finish to it which means the fiberglass was not prepped correctly the first time.
If you can't hold the boat by the motor and shake it around, the glue joint is not strong enough.
Jon
Scuff the fiberglass up before gluing, and clean with denatured alcohol. The fiberglass appears to have a shiny finish to it which means the fiberglass was not prepped correctly the first time.
If you can't hold the boat by the motor and shake it around, the glue joint is not strong enough.
Jon
Comment