testing geico , run x642 2sx2s ,, at 3:40 i fitted m545 .running 2x4s packs for a total of 10,000mah as the T180 esc was having the old lipo cut off failer with the 2s x 2s 45c 5000mah packs ,it was fine with x642 .but as soon as a fitted the m545 it would not run , i lowered the cut off value to 2.8volts but still same ,so i used 2x4s 5000mah 45c in para ,and it run fine , i could of just turned lipo cutoff off , is this a fault with these t180s or is it normal ? anyone know
geico NEU 2200kv castle x642/m545
Collapse
X
-
Lets put this into prospective . this esc has never had a problem with 2 x 2s 5000mah 45c zippy lipos running a leopard 2200kv 4074 with x642 . now with the castles 1515 2200kv it run fine with lipo cut off set at 3.4v .but as soon as i fitted the m545 ,it instantly would not run half a lap i even dropped it to 2.8v ,still didnt help i have another new t180 here i might try but i suspect it will do the same ,to much amp draw for the cheap 2s zippys ,i see most the guys running high end lipos such as Hyperion brand ,but they all run with lipo cut off switched off . they know how many laps they can do ,and always bring there boats in with 15% charge left , club rules in Au only allow 650 gram battery limit .as much as i would like to run 2x4s packs i simply am not allowed . at this stage i have 3 choices ,
1 turn it off ,. 2 buy better battery's . 3 prop it back to m445.. i need to get 6-7 laps out of it , on a bigger lake then in this video thats a testing pond we use , see my other videos for the big course lake ,
cheers guys thanks !Last edited by joker rc; 08-06-2012, 01:09 AM.Comment
Comment