rips shocker first saw attempt

[RIPFENCE]

here is my FC shocker doing 2 short saw passes real quick watch

setup is
twin leopard 4082's 1500kv
dinogy 6s and 2s in series for 8s 65c

currently 88 mph i am pretty happy with it
its real stable and i think it can be aired out a little more...if i can get over 90 i will call it good......maybe haha
video quality is not great but i am getting a nice hd camera soon enough to make some better ones

http://www.youtube.com/watch?v=-l7k7RF-VpE

[Basstronics]

Link no workie.

[RIPFENCE]

can you trythe link again man? thanks a lot

[Prop-a-Gator]

That boat is rippin!!! (:D)

Sent from my ADR6350 using Tapatalk 2

[Basstronics]

Works now. Nice!

[srislash]

Right on Ripfence,Good job.I got mine to 80 today.They sure like speed once you get em dialed.
What props are you running?

[Rumdog]

Nice, bro!

[RIPFENCE]

thanks guys i cannot believe my gps is staying on the velcro on the back of the boat..i am running the cnc 50 mm 1.8 pitch 3 bladers..i think i am pretty much maxed out on props and do not really want to go any bigger...probably just some fine tuning andmoving batteries around will gain me a few mph

[Prop-a-Gator]

Velcro huh? I hope you have some flotation for your gps.

Sent from my ADR6350 using Tapatalk 2

[RIPFENCE]

nope lol just never planning on flipping it..

[RIPFENCE]

gps will not work inside the carbon fiber hull

[Prop-a-Gator]

gps will not work inside the carbon fiber hull

Yup. I've seen guys attach them to the back like you did for that reason. Usually they tape the heck out of them. I'd shrink a little piece of foam to it.

Sent from my ADR6350 using Tapatalk 2

[srislash]

I got one(GPS) at the bottom from a wipeout whilst taped on.Ooops. Do you have any idea of the draw Rip?My 5018's on 6s with 1800kv's is 150 amps.

[RIPFENCE]

i could not tell what the draw is..honestly....i have swordfish 240's in mine for that reason so i would not have to worry too much about that...if you are seeing 150 then maybe i can prop up to 52mm haha..really my draw should be similar i would think..you are using a slightly hotter wind but i am trying to spin a few thousand rpm more with the same prop...do you have yours totally aired out yet?..i definately have my cog way forward now because i am so paranoid about a blowover..it basically plows through the water until i get up to above 50 to start packing some air and fee it up a bit..i really feel like i can get some more air under it to get to 92 or so..

[Heaving Earth]

Nice work there rip! Rippin it up!