my DF 33 cyberstorm

[video200]

anytime :)
all of the above (besides the nemesis blue) can be bought here at OSE by the way. can give you the links if you whant them.

[video200]

a little update on my DF.
have a 1521 1y in it now and here is the result with a X642 (done by eggneg)

http://www.youtube.com/watch?v=TA4rtFby4kk

that 3 min run took 2044mah and temps was motor (hotest spot) 91.4f and the esc was 96f

the ETTI 150 race is worthless on the neu in the beginning with an all or nothing response til it had a few secconds of runtime.
sorry for the filming. but it is my 11 year old kid whos dooing the filming :)

[tth]

I'm glad you decided to go with the 1521/1y. You made the right choice. Notice the cooler temps all the way around. You now have a fast, reliable setup.

[video200]

i did so after advise from you guys :)
temps on the esc is higher then on the 13XL but the motor is so cool im starting to worry if its going to freeze up during fall\winter.

im thinking about changing the esc to a turnigy 180 but i am unshure how it wil deal with the 6s and max amp on every run

[tth]

One reason for the high ESC temp is the On/Off throttle. If you go wide open for the full duration, its much easier on the ESC.

[forescott]

You will like the 180. They work great!

[video200]

yes i know and the 1521 pulls alot more amps. but it is still well within what i am comfortable with.
the only thing i dont like compared to the 13XL is how the etti behaves. as you can se in the beginning of the video the trothle is all or nothing in the begining. when i was using the 13xl it was smooth all the way but now it is on\offish til i run it for a few secconds.

[video200]

You will like the 180. They work great!

but wil they last on 6s ? it is on the max of what it is made for.

[forescott]

Yes it will. A lot of guys here on the forum use em. I would use an external bec on 6s though to be safe.

[video200]

guess i just been scared from the hydra`s for to long. wil have to order one next month and se :)

[forescott]

I have never been a big fan of the etti's. They seem to have more issues than most other esc's.

[video200]

the etti been good to me. but with the neu it feels sluggish til i got the boat on plane then it starts to feel good again.
if you listen to the first 30-40 secconds on the vid its almost as if its stuttering when its going along. this stops after a wile. but it never happend on the 13xl motor. but then again the nemesis blue is far as demanding as the neu.
but i am loving the neu. i cant se my self going back to feiago after this Ü

[tth]

Set timing to 7 degrees advance and put to low start power. This is what you should use for your setup. The wierd throttle response in the beginning is the auto detect of the ESC. It is a default setting on the Etti. I use Etti's and Hydra's. I am equally drawn to both. Once you get your settings (esc) and setup (boat) right, all will be smooth. Believe me I have had my fair share of problems (mainly my error) with most brands of ESC's. For me I will stick to Hydra's and Etti's. Customer support alone is worth the extra $$$.

[video200]

for me hydra is a big no no. blew up one that was well within its limits. so now i have a hydra 240 LV that i just dont dare to run on 6s.

i like the etti besides the trothle response. at the moment it is running with the stock settings but wil se if i cant find the old user manual and set it to soft start :)

[video200]

are there some kind of program card with those etties ?