my DF 33 cyberstorm

[tth]

No program card......good ol' transmitter beep type. Instructions are on the Etti website.

[tth]

for me hydra is a big no no. blew up one that was well within its limits. so now i have a hydra 240 LV that i just dont dare to run on 6s.

i like the etti besides the trothle response. at the moment it is running with the stock settings but wil se if i cant find the old user manual and set it to soft start :)

Good send me your Hydra.....I'll put it to good use.

[video200]

its already in good use. but only on 4s. i have a hate\love relationship with that one.
it have to be the best controller in the world. if i could ony dare to use it on 6s in my DF along with the 1521

[video200]

the manual on the etti site was incomplete. but i found one here. http://www.astecmodels.co.uk/ETTI%20Navy.htm

[Joern Markset]

I run the 240LV on 6S without any problems.

Just before the weekend I was talking with Dee @ ETTI and he said they had a programming software project going on.

[video200]

my first hudra 240 blew up after about 30 sec (5 of them on the water) on 5S so i got a little "scared" to run it on anything close to its limits.

[Joern Markset]

Sounds very strange. I have 3 240 LV and they all perform good on 6S. Running 1.03 software.
Also ran 6S on my 120 LV (which is a the bottom of lake now) and had no problem at all. Send an e-mail to castle and ask what to do.

Damn I guess I have to build another Cyberstorm, nice boats. Should not have sold my boat away...
Have more projects going on, but unfortunately enough time to finnish projects as soon as I wished I could....

[video200]

in on my 3 240 LV now.
1 was replaced for free 1 i had to pay $150 to get replaced and the last one is running on 4s as they way WAY to exspencive to replace every 30 sec or so.

spoke to castle a few times and they have great customer service. but still for that price i can get others that preform just as well :)

so what projects you have running jørn ? i know you been buying motors on here :D

[Joern Markset]

Well, you know, when you`re so curious as I am it is always lot of projects going on.
Just built a DF29 that I failed to make self rigthing. You should have seen me when I launched the boat up side down and waited for it to flip over.... Well, I was standing there with my beard in the mailbox cause the boat float like a piece of wood... So I`m gonna sell that boat away. It performs like my other 29", but looks kind of funny with a chamber which is good for nothing....
It is a good setup for someone that would like a fast and stable boat for a small amount of money.
I`m in weekly contact with the DF manufacturer, and there might come one or two hulls that is self righting. Also waiting for the new 24" DF hydro to arrive, looking forward to see how it is.
Other than that I have a DF12 on 2S going on for the youngsters.
DF31 with 10XL - DF67 with 2215 - DF33 with the 2240 lehner I just bought from a guy here on OSE.
And I want to finish the DF90 with a 2230 motor.
The F1 boat is also on the bench, this one will take some time to finish
I just can`t get enough of the electrics, it is so fun

[video200]

your serius ? and here i though you became one of the most wining EVER just by beeing lucky

cant you put somw wights into that flood chamber of yours so it works ?

[Joern Markset]

For sure it doesn`t hurt to be lucky once in a while

I could have tried some weights, but I needed to push a lot on the side of the boat to actually get it flip over, so I guess there would be a lot of wight needed.
Easier to build a new one since my basement is full of boats

Regarding the 240LV, have you tried to put on cap banks?

I`m very satisfied with the ETTI esc and the service ETTI provide.
The new high volt/high amp logger came in just before the weekend, looking forward to give it a shot. It is a cheap way to do logging if you don`t want to buy a full Eagletree system.

[video200]

already been looking at a new eagle tree (last one diddent like to be wet)
make a larger chamber hehe.
i havent added caps to the hydra atleast not yet but maybe some day.

i think we might need a "TOPIC FOR PRATESYKE MODELLBÅTFØRERE !" in here as well

[video200]

TTH.
did as you sugested with the timing and soft start. the soft start diddent do much but the timing cooled the ESC down ALOT. thank you for your help. it is much apritiated :D