my brushless proboat apache 24

[SweetZ28]

I am happy with it now!

http://www.youtube.com/watch?v=sibSxqJVlUc

[Rumdog]

Smooth running!

[Brushless55]

Looks good man!
did you check temps? I bet you could run a bit bigger prop

[SweetZ28]

Looks good man!
did you check temps? I bet you could run a bit bigger prop

Thanks I have the 3300KV motor and my prop was 31.5mm the esc ws 79deg and motor bairly over 100 deg but my 3S battery got hot 130 to 135deg but i ran it till 3.4 lipo cut off...I am going to grind a cf prop down to 30mm or 29mm it will make the battery run cooler ... and you never know it could get faster also.
If it don't work out well i could just run it a min or so less and it should be ok.

Z

[Brushless55]

sounds a little odd to me that your esc is cold and your motor warm but your battery is hot?

[SweetZ28]

sounds a little odd to me that your esc is cold and your motor warm but your battery is hot?

Yea i know ... well i got the 3000 lipos on e-bay for $22.00 shipped each they say there 35C?
here is the link to them..

http://cgi.ebay.com/EC-POWER-3000mAh-35C-11-1V-3S-LIPO-li-po-BATTERY-AKKU_W0QQitemZ180431019236QQcmdZViewItemQQptZRadio_Control_Parts_Accessories?hash=item2a0286dce4

[Rumdog]

take temps 2 minutes in. If the batt is cool, youre prob running too long.

[Jesse J]

runs real nice, yes good batts are good. might go 2P if possible to get you mah ~ 5000 or so. Really like how she rides, congrats. could you post some shots of the hardware?
J

[SweetZ28]

runs real nice, yes good batts are good. might go 2P if possible to get you mah ~ 5000 or so. Really like how she rides, congrats. could you post some shots of the hardware?
J

Hi thanks i think i posted some shots in the apache section i will see if i can get the URLs to it for you.
THANKS

Hi here look through this there are some photos there are more in different spots in the apache section also.
http://forums.offshoreelectrics.com/...ad.php?t=10491

[Brushless55]

take temps 2 minutes in. If the batt is cool, youre prob running too long.

that was my first thought, possibly getting hot running down to lvc?

[SweetZ28]

that was my first thought, possibly getting hot running down to lvc?

Yes most likely but i am going to try the new 29mm prop and see how that goes...it may cavatate to much and if that happens back to 31mm and just time my run until lipo cut off comes on and subtract a min and i think i will be good.

[Brushless55]

I'm thinking, the 29 will just spinnn and spinnn

[SweetZ28]

I'm thinking, the 29 will just spinnn and spinnn

We will see I have to try it.
Z28

[FE Wannabe]

Z28,

Glad to see that it is running good! Those Apache's can be fun once you get them moving twice the stock speed or better.
How is it turning for you under power? I am supposing a lot better than with the outdrive doing the turning. I know mine was hooking badly before I went to the separate rudder. I think I may need to trim a little of the bottom of my rudder, because it is pulling a little to the right when going straight, and I think it may be the extra drag of the long rudder.
Have fun with the fine tuning!

Brad

[Brushless55]

We will see I have to try it.
Z28

Love to know..
keep us up to date