What is hot and rocking at BBY

[Philmunsterman]

Randy, Just wondering, did you ever get to finish one of the N2 Riggers and has anyone had a chance to run one yet ? Phil

[RandyatBBY]

Randy, Just wondering, did you ever get to finish one of the N2 Riggers and has anyone had a chance to run one yet ? Phil

We have ran the sponsons at 84MPH and have not ran the tubs yet.

[RandyatBBY]

My wife bought me one of those years ago. It was great for HSS bits, but I never was able to get it work well on cobalt bits. Probably user error!

Any updates on the Smokin' Joe hull? We are a couple months from boating season in Michigan, and I'm starting to get the itch again.

Thanks!

Her is the rear hatch I just built in to the hull, I wish I could have the hatch that big in the front of the boat but I think we can live with it for the scale look.



Uploaded with ImageShack.us

[RandyatBBY]

Well I worked over the weekend getting the Smokin Joes FE 30 deck and cowl plugs close to the finish point. Just a little more to do then I will be on the flashing and parting lines. at the end of the weekend the shop and myself were needed to be cleaned, time to take the trash out and we got rain storm coming in and got soaked!


Uploaded with ImageShack.us

[Shooter]

Lookin good Randy! Thanks for the update.

[RandyatBBY]

Well I got a new motor for my Cat. I have never liked the rails and motor mount tied together in the cat. Just way too hard to switch the ESC at the race. So, I designed a new motor stabilizer for the SC33 and SC27. This is a new motor from Hobby People it is a 2370Kv supposed to push 4S great. I believe it is a 4 pole motor Possibly 6pole. This motor mount and rear motor stabilizer is light, strong and inexpensive.


Uploaded with ImageShack.us

Key word of the day stabilizer.

[RandyatBBY]

One of my new Zephyer 27 in Fiberglass.


Uploaded with ImageShack.us

[RandyatBBY]

Getting ready to sand the boat to prep for paint. This is one of the hulls with out the PVA on it , it has a shine of it own.

This shot is of some of the new work we are doing how clean it is coming out.


Uploaded with ImageShack.us

[Meniscus]

A great deal of time, effort and refinement has gone into the results you are getting now. Looking great Randy!

[RandyatBBY]

A great deal of time, effort and refinement has gone into the results you are getting now. Looking great Randy!

Well we are building stock as we do orders. We are getting a real standard going on the hulls now. I am very happy with the FG/CF work Cory is doing. Each morning from 11AM to 2PM we work together to continue his training. So I always have hands on each part he is working on and these are the combined results. When we have enough work to keep him busy he will be full time.

[RandyatBBY]

Hear is the final of the Zephyer 27 that was naked in post #412

trying some thing different with the up load

[Brushless55]

I love it!

[RandyatBBY]

I love it!

Glad you like it!

[RandyatBBY]

Working on a new rear motor stabilizer for 1521 threw 1527 motor size. It is set up for 5 inch rails and be able to be cut down to 4 inch rails or evan be a floor mount.



Uploaded with ImageShack.us

[RandyatBBY]

Sunday fun run

Well I really had fun on Sunday running my newest boats. I started the day with the Mini Zephyer. this little 2S1p boat he a little ball of fun light nimble but you must watch to make sure it is not blown over. Next I ran the Scat Cat 33 what a brute with the XTM Rail motor it it. Then I ran the Zephyer 27 with the P Speck setup good fun very stable and as fast as you want in a little pond. I finished up the day testing a customers boat the Oval Master 26 on 2S2P and a 1512 1D this motor it strong with a lot of powerswings a 648 to 452 three blade prop. With the self righting chamber it can not be stopped pictures to come.