Painted my Voracity

[Crash]

Still in work, getting its clear applied then wet sand and polish
P1050076.jpg
P1050080.jpg
P1050089.jpg

Also, reinforced hull and canopy with FG

[Turbo Dan-O]

Very nice!!!

[Crash]

Thanks Dan
Its been nice whipping this hull into shape
only had 2 real issues that I didn't like, the hull would of been fine as is.
I found the seam between the top of hull and bottom of hull had some hollows and very thin where the 2 pcs meet.
I added 1 layer of FG to the hull seam on sides and rear of boat at seam.
Then I added 1 layer FG on the bottom inside boat on sides, center and rear area .
I also added a layer around inside the canopy .
It made a dramatic difference in overall stiffness in the flat areas
I am very pleased with the FG work
The paint is a lacquer
I am considering vinyl wrap from Darkside Studios on ebay but, they don't have a Voracity hull to digitize from yet. Id have to send them a hull to digitize a pattern

Very nice!!!

P1050081.jpgP1050082.jpgP1050084.jpg

[kfxguy]

Dang that thing looks sexy in white. Mine needs repaint one so I was gonna do it in a house of color blue that looks close to factory but seeing the shape of the hull in a different color, I might just change it to something else. Looks good!

[Crash]

Thank you
The white does show off the shape of the hull.
I post a video of the boat after wet sanding and buffing to show off all the hours I have in the prep work.

[arrover]

That looks really great!

[Crash]

Thanks

here is the wrap I like
11121756_870197923040327_5620251890700760361_o.jpg

That looks really great!

[Crash]

https://drive.google.com/file/d/0B5R4bET1OwRydnYtYVlZMW5HRDA/view?usp=docslist_api

[Tamelesstgr]

Nice to see someone getting creative with the hull. I for one can't leave anything stock!

[Crash]

DubliColor Deep Blue Metallic

0308160635_25493868372_o.jpg0308160635a_24985783123_o.jpg0308160635b_25612500285_o.jpg0308160635c_25612501865_o.jpg0308160635d_24982002444_o.jpg

[kfxguy]

Beautiful!

[Tamelesstgr]

Dam, that's too nice to put in the water.

[Crash]

Thanks GUys
I am waiting for it to cure before handing it too much.
The weather is getting warmer here so, probably about 2 to 3 weeks the clear will be good and hard.
then I can wet sand and buff before assembly.
all I need is a prop for it.
Dan

[Crash]

26214625744_5a50266735_h.jpg26547494120_7af6141632_h.jpg26752552311_d84e264fb9_h.jpg

[kfxguy]

The minimal amount of decals looks good