PRO BOAT UL-19_How to run on 6S with stock prop
Collapse
X
-
Sam,
How in the world did you get the existing water outlet nipple out of the boat to replace with the 2 larger diameter outlets from OSE? I simply cannot get mine out. When I manage to get a socket around the bolt on the inside (not an easy feat in itself) and then stick a flathead screwdriver into the slot on the outsode of the nipple and start turn it, the flathead just strips the slot away as the aluminum is so soft. I feel like maybe the applied some sort of glue to the threading where the bolt is that caused it to bond solid.Comment
-
Sam,
DO NOT try to drill out those nipples. I just went to do it and one went ok and the next one snapped right off. Got super hot and snapped the whole nipple off then I couldn't get the nipple off the drill bit so I held the nipple with a pair of pliars and put the drill in reverse and it snapped the drill bit in half. I effectively ruined the ESC before I ever enven got to use it and it happens to be the most expensive part in the boat as well :-(. Unless I can somehow get Horizon or Amain or one of the Dynamite retailers to sell me just the cooling plate I've just ruined a brand new ESC :-(IMG_9459.JPG
Comment
Comment