Good stuff Darin. Glad you got those designs in line.
Stiletto Race Prep
Collapse
This is a sticky topic.
X
X
-
Darin What is the width & height of the battery box ?. Will the Turnigy 4s 5000 lipos fit. http://hobbycity.com/hobbyking/store..._40C_Lipo_PackComment
-
If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
Yup... I don't see why not. I think I mentioned above that I tried it with a ThunderPower 50C 5200 mah HardCase 4S1P pack yesterday and it fits in with room to spare... Balances correctly as well. Quite a bit of room in the battery area.
If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...Comment
-
The ThunderPower pack is 45.2H x 46.5W x 138L... And there is still room above the pack. The Turnigy is 49H x 37W x 149L, so I think it should fit. Can always lay it on it's side.Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
This one is beautiful Darin. I think I may just get one. Would be my first tunnel.If all of your wishes are granted, many of your dreams will be destroyed!Comment
-
Yup... I don't see why not. I think I mentioned above that I tried it with a ThunderPower 50C 5200 mah HardCase 4S1P pack yesterday and it fits in with room to spare... Balances correctly as well. Quite a bit of room in the battery area.
If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...
I will break out the batteries(and account for the side wiring) with the ruler tonight and see or like Darin said you can lay them on their side.
Congrats on the Boat Darin!Last edited by electric; 06-17-2010, 10:03 AM.Comment
-
Nope... the BJ motor tests around 1625-1650 actual KV. The SV27 around 1525-1550KV... I haven't tested this new one for actual KV, but it's a new wind, and should be 1800KV or more. I'll try to setup my test bench again one of these days to get the actual numbers... It's definitely a new motor wind. I had them annodize it and the ESC a different color so they'd be easier to differentiate.
electric - The internal dimensions of the battery tray (Width and Height) are 2 3/8" and 2 3/8". There is right at 1" between the bottom of the tray and the bottom of the ESC platform as well. A 2S pack or a 6-cell NiMH pack will slide up under there...Darin E. Jordan - Renton, WA
"Self-proclaimed skill-less leader in the hobby."Comment
-
Here is his chart.Attached FilesSteven Vaccaro
Where Racing on a Budget is a Reality!Comment
Comment