Stiletto Race Prep

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • johnf
    Fast Electric Addict!
    • Dec 2009
    • 1078

    #16
    Good stuff Darin. Glad you got those designs in line.
    Catching Air!

    Comment

    • rchippie
      Senior Member
      • Jan 2010
      • 567

      #17
      Darin What is the width & height of the battery box ?. Will the Turnigy 4s 5000 lipos fit. http://hobbycity.com/hobbyking/store..._40C_Lipo_Pack

      Comment

      • Darin Jordan
        Fast Electric Addict!
        • Apr 2007
        • 8335

        #18
        Originally posted by rchippie
        Darin What is the width & height of the battery box ?. Will the Turnigy 4s 5000 lipos fit.
        Yup... I don't see why not. I think I mentioned above that I tried it with a ThunderPower 50C 5200 mah HardCase 4S1P pack yesterday and it fits in with room to spare... Balances correctly as well. Quite a bit of room in the battery area.

        If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...
        Darin E. Jordan - Renton, WA
        "Self-proclaimed skill-less leader in the hobby."

        Comment

        • rchippie
          Senior Member
          • Jan 2010
          • 567

          #19
          Originally posted by Darin Jordan
          Yup... I don't see why not. I think I mentioned above that I tried it with a ThunderPower 50C 5200 mah HardCase 4S1P pack yesterday and it fits in with room to spare... Balances correctly as well. Quite a bit of room in the battery area.

          If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...
          Thats great i just wanted to make sure . Because the Turnigy 5000s are so wide compared to other lipos.

          Comment

          • Darin Jordan
            Fast Electric Addict!
            • Apr 2007
            • 8335

            #20
            Originally posted by rchippie
            Thats great i just wanted to make sure . Because the Turnigy 5000s are so wide compared to other lipos.
            The ThunderPower pack is 45.2H x 46.5W x 138L... And there is still room above the pack. The Turnigy is 49H x 37W x 149L, so I think it should fit. Can always lay it on it's side.
            Darin E. Jordan - Renton, WA
            "Self-proclaimed skill-less leader in the hobby."

            Comment

            • BakedMopar
              No Mo Slipah
              • Sep 2009
              • 1679

              #21
              This one is beautiful Darin. I think I may just get one. Would be my first tunnel.
              If all of your wishes are granted, many of your dreams will be destroyed!

              Comment

              • Grimracer
                Senior Member
                • Nov 2008
                • 662

                #22
                Darin,

                The boat looks great.. great job!

                take care brother..

                Grimracer

                Comment

                • electric
                  Fast Electric Addict!
                  • May 2008
                  • 1744

                  #23
                  Originally posted by Darin Jordan
                  Yup... I don't see why not. I think I mentioned above that I tried it with a ThunderPower 50C 5200 mah HardCase 4S1P pack yesterday and it fits in with room to spare... Balances correctly as well. Quite a bit of room in the battery area.

                  If one wanted to substitute an aftermarket ESC for the stock one, then the shelf the ESC sits on could also be removed, (lay the ESC on the batteries or something) and I think one could fit TWO 4S packs in there, though I have no idea why you would want to do that...
                  Looking at the picture, I am wondering whether those turnigy's will indeed fit. Mainly because the turnigy's have those big honking wires that feed out of the side which impedes the side to side width. I can barely squeeze them into a UL1 for the same reason.

                  I will break out the batteries(and account for the side wiring) with the ruler tonight and see or like Darin said you can lay them on their side.

                  Congrats on the Boat Darin!
                  Last edited by electric; 06-17-2010, 10:03 AM.

                  Comment

                  • 6S HYDRO
                    Fast Electric Addict!
                    • Mar 2009
                    • 1320

                    #24
                    Darin i thought on your personel tests that the bj26 motor a36561500 really was around 1800kv, so is this new 1800kv version in this new boat really just the same thing?

                    Comment

                    • Darin Jordan
                      Fast Electric Addict!
                      • Apr 2007
                      • 8335

                      #25
                      Originally posted by 6S HYDRO
                      Darin i thought on your personel tests that the bj26 motor a36561500 really was around 1800kv, so is this new 1800kv version in this new boat really just the same thing?

                      Nope... the BJ motor tests around 1625-1650 actual KV. The SV27 around 1525-1550KV... I haven't tested this new one for actual KV, but it's a new wind, and should be 1800KV or more. I'll try to setup my test bench again one of these days to get the actual numbers... It's definitely a new motor wind. I had them annodize it and the ESC a different color so they'd be easier to differentiate.


                      electric - The internal dimensions of the battery tray (Width and Height) are 2 3/8" and 2 3/8". There is right at 1" between the bottom of the tray and the bottom of the ESC platform as well. A 2S pack or a 6-cell NiMH pack will slide up under there...
                      Darin E. Jordan - Renton, WA
                      "Self-proclaimed skill-less leader in the hobby."

                      Comment

                      • 6S HYDRO
                        Fast Electric Addict!
                        • Mar 2009
                        • 1320

                        #26
                        im almost positive you said it was at 1799 or somthing around that for the orig. bj

                        Comment

                        • Steven Vaccaro
                          Administrator
                          • Apr 2007
                          • 8720

                          #27
                          Here is his chart.
                          Attached Files
                          Steven Vaccaro

                          Where Racing on a Budget is a Reality!

                          Comment

                          • AndyKunz
                            Fast Electric Addict!
                            • Sep 2008
                            • 1437

                            #28
                            The BJ is a low-RPM motor, much lower than the AC one.

                            Darin may have said he WANTED an 1800Kv motor. I know we had lots of e-mails going back and forth to get the 1800 he wanted in this one.

                            Andy
                            Spektrum Development Team

                            Comment

                            • 6S HYDRO
                              Fast Electric Addict!
                              • Mar 2009
                              • 1320

                              #29
                              well i was pretty close, on extreme timing

                              Comment

                              • Shane_744
                                Choppin' it up
                                • Sep 2009
                                • 92

                                #30
                                Great information and great write up on the new boat.

                                How does it feel to have your name and picture on the box!?!
                                TEAM Crawler Innovations, TEAM Holmes Hobbies, TEAM BC Paints!, TEAM OTTSIX , TEAM Y-Town Crawlers

                                Comment

                                Working...