help with project geico

[shannon87]

hi thanks for replyin in regards to the boat having less bounce while goin faster the prob is im limited to 4s so it seems to be a good startin place with the bracket and lots of tuning lol.

And im hopefully getting help from bone war on an interesting mod thats under wraps lol that ill be doin after a while once i get the hang of things but ill replace the bullets and motor connectors to 5.5 mm bullets

[pyroM!KE]

I just put on a kinetic offset v2 rudder on my MG..Stock I couldnt get the bounce out..Installed the v2 rudder and the bounce entirely went away..I say go for the offset rudder..Get the v2..

[shannon87]

thats sounds great thats what alot of people ay as the v1 would increase drag as the bottom of the bracket is not machined away hopefully i should be getting the geico in a bout a month i cant wait. I was also wondering what would be a good prop to start with dont worry about that as it seems to be an x642

But im gunna leave it tock as to not void the warranty i was going to use turnigy lipos a there a good price, 40c but are 4mm bullets so id either have to get jan from kintec make deans to 4mm bullet adaptors or find some reasonable priced lipos that have deans but it dont matter about weight as i can use those in a different boat does any one know of reasonable lipos with deans but ill replace all connectors to 5.5 mm bullets and other things when the warranty expires and that way i can run it while im waiting for parts and learning to drive.

I know this is the opposit of what you guys would do but it would save me getting different packs and would also save me getting adaptors which is another thing that would increase resistance and go wrong and i could get deans connectors done on the turnigys at my LHS that way i can use those packs and not use adaptors