Miss Geico 29 BL Catamaran Videos

[scoota]

Could someone tell me the hull ONLY measurements ?

Cheers jason

[scoota]

Hull is $200, hardware (rudder & Strut) is only $20-$40, the rest I have piles of.

Thanks guys. I was getting frustrated by all the threads on the boat and I wasn't seeing the pics I hoped. I'm fine now, medicated... LOL...

Andy, what part#'s do I need for strudder assembly? Hull is PRB4101....

Does the hull come with the stuffing tube ?

Where can i get the hull only guys ?

[Darin Jordan]

Does the hull come with the stuffing tube ?

Where can i get the hull only guys ?

I'm assuming it comes with the stuffing tube, since it's laminated in.

ALL of the ProBoat stuff is available from Horizon Hobby...

[scoota]

I'm assuming it comes with the stuffing tube, since it's laminated in.

ALL of the ProBoat stuff is available from Horizon Hobby...

Thanks Darin

[T.S.Davis]

Darin, once you mentioned the a bind and go version. Did that ever happen? I hate to have yet another radio in my mix.

[Darin Jordan]

Darin, once you mentioned the a bind and go version. Did that ever happen? I hate to have yet another radio in my mix.

I don't remember mentioning that, but either way, this boat comes with an MR3000 RX, so you can just bind it to your existing Spektrum radio and be good to go. The stock TX should be worth a few $$$ in the secondary market, I would think. (I'm going to let my daughter have mine for her Traxxas Stampede... )

[scoota]

Does Horizon hobby ship to Australia , cause they only look like they ship in the US when i tried to order a hull ...

[AndyKunz]

To find the parts you need, go to this link:

http://www.horizonhobby.com/Products/Default.aspx?ProdID=PRB4100

Now on the right side, click on "Parts Listing." Scroll down the list to pick out the items you want.

Andy

[ray schrauwen]

Yes but, there is a slight confusion on the strut & rudder. It looks like prb4106 is both strut & rudder and there is a part# for stut only too.

No rush, just wantto clarify and not buy an extra strut.

[AndyKunz]

Does Horizon hobby ship to Australia , cause they only look like they ship in the US when i tried to order a hull ...

We have an importer there. Go to RCGroups, look up ChuckTseeker - he should be able to point you in the right direction.

Andy

[AndyKunz]

Yes but, there is a slight confusion on the strut & rudder. It looks like prb4106 is both strut & rudder and there is a part# for stut only too.

No rush, just wantto clarify and not buy an extra strut.

There are no duplicate parts. You need to buy both to get the whole thing.

Andy

[spence72]

Has anyone put one in traffic yet? I'd like to know how it "handles" about 5 laps in. Not a criticism. Just a need to know for me. I've seen the competitions offering.

Terry,

I'll bring mine out to the next club race on the 19th, I'm also curious to see how it handles in "race water".

I haven't had a "man" prop on her yet, but I did crack 38MPH with a K45 plastic. I'm waiting for a new flex cable before I try some metal props. My initial impression is very positive. Repeatedly crossing my own wake while executing full speed left and right turns showed no tendency to upset this hull, it just cuts through and begs for more. We may have a winner here...

Bob

[ray schrauwen]

There are no duplicate parts. You need to buy both to get the whole thing.

Andy

Ten-Four

I get it now. Strut with bearing is separate # and rudder with strut must mean mount for strut. need them both... gotcha...

[scoota]

We have an importer there. Go to RCGroups, look up ChuckTseeker - he should be able to point you in the right direction.

Andy

Cheers Andy

[T.S.Davis]

Awesome Bob. Can't wait to see it.

Bob is kicking the pants off us in our club LSO class with an SV. If he says it seems to handle well it probably does.

Darin, is the radio that comes with the RTR just a stripped down version of what we already have?

Oh, also, any more color scheme planned? Might get confusing when these start showing up everywhere.