Miss Geico 29 ugprading ESC's

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lenny
    Fast Electric Addict!
    • Sep 2010
    • 4294

    #16
    I would try that setup on 5s first and see what temps are,
    And if all looks good,
    Than try the 6s for 1 minute and check all temps.
    Than if the setup is happy and warm try running for 2 minutes and so on.


    Originally posted by Ozzypatrol
    Bump, can I run my s&b x642 on 6s with the 180A esc and 1590kv stock motor?. All connections are bullets


    Sent from my iPhone using Tapatalk
    ? ONLY IF THEY WORK

    My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

    Comment

    • Ozzypatrol
      Member
      • Jul 2013
      • 57

      #17
      Ok, just about to put the ESC in the boat. What timing should I run it on for 4S, 5S and 6S on an X642 and proboat 1500kv V2 motor?

      Cheers,

      BJ

      Comment

      • iop65
        Senior Member
        • Mar 2013
        • 367

        #18
        11.25°

        Comment

        • lenny
          Fast Electric Addict!
          • Sep 2010
          • 4294

          #19
          Try it on 3.75 and check temps at 2 minutes, And the highest would be 7.50.
          That is a stock PB 6 pole motor right ?
          ? ONLY IF THEY WORK

          My youtube videos.http://www.youtube.com/user/61manx?feature=mhee

          Comment

          • Ozzypatrol
            Member
            • Jul 2013
            • 57

            #20
            Too easy, will need to run x642 for a bit, it's hard to get props in Australia

            Comment

            • Ozzypatrol
              Member
              • Jul 2013
              • 57

              #21
              Yeh mate, the v2 mg proboat 1500kv 6 pole.

              Comment

              • Ozzypatrol
                Member
                • Jul 2013
                • 57

                #22
                Boat ran well, got about 15 runs in on the weekend. Tried 5s with the X642. Didn't get a speed ut will post vids on youtube. Initially ran on 3.75 timing then pushed it up to 7.5. Temps all looked pretty good with the batteries coming in at the highest - 45degC. Also tried 6s with 3.75 had to pull the boat in after 1 lap as the strut set up just caused the boat to fishtail wildly without and extra speed.

                Comment

                • iop65
                  Senior Member
                  • Mar 2013
                  • 367

                  #23
                  like i said ;11.25° for that motor
                  3.75 that's for D-wind
                  this is a Y-wind!

                  Comment

                  • Ozzypatrol
                    Member
                    • Jul 2013
                    • 57

                    #24
                    ah ok, will try again, was er'ing on the side of caution. Cheers mate

                    Comment

                    • Ozzypatrol
                      Member
                      • Jul 2013
                      • 57

                      #25
                      is there a limit to how much timing you can add? Or do I just go off temperature?

                      Comment

                      • Ozzypatrol
                        Member
                        • Jul 2013
                        • 57

                        #26
                        Sorry about the poor quality,


                        Comment

                        • iop65
                          Senior Member
                          • Mar 2013
                          • 367

                          #27
                          Originally posted by Ozzypatrol
                          is there a limit to how much timing you can add? Or do I just go off temperature?
                          max 15° here ,but check the temp with 11.25 first!

                          Comment

                          Working...