New hardware taking shape

[kookie_guy]

So I'm designing my own hardware. Here's what I have so far. Learning solid works as I go along, hehe. Gonna get my CNC shop to quote this when the design is fully complete. Not much to look at right now, but it's just the beginning. I will post as stuff gets completed.

[lonewolf]

Just about any machine shop can do this kind of work, a cnc is not need and will cost ya more than buying it outright. I would check out the local high school machine shop, a student would do a great job and he would get extra credit. And you might get a new boating buddy out of the deal .... Just a thought .

[kookie_guy]

Just about any machine shop can do this kind of work, a cnc is not need and will cost ya more than buying it outright. I would check out the local high school machine shop, a student would do a great job and he would get extra credit. And you might get a new boating buddy out of the deal .... Just a thought .

ya I could also make it myself at work (have full access to a machine shop). I was thinking of having about 100 of em made and sell off on e-bay. Gotta see pricing first tho to see the margins.

[frdvschvy]

ya I could also make it myself at work (have full access to a machine shop). I was thinking of having about 100 of em made and sell off on e-bay. Gotta see pricing first tho to see the margins.

If you go this route the folks here at OSE should get first dibs

What will be unique to this hardware kit compared to others on the market?

[kookie_guy]

If you go this route the folks here at OSE should get first dibs

What will be unique to this hardware kit compared to others on the market?

well, you've seen one, you've seen em all. It's gonna be a lot shorter than the fuller's one which should make it much better looking. Plus it's going to be made for the BJ26, not a generic item. I like the twisted liquid racing one, but too many people having issues with that company right now. So I'm hoping price and service will be the main selling point.

[kookie_guy]

quick update. haven't really had tonnes of time to work on this, but here's where I am so far. Hopefully by tomorrow I should have the rudder drawn in, as well as the complete transom.

[kookie_guy]

just got the transom and stuffing tube drawn up. Now, couple quick questions for the experts....

1) how deep should the rudder be submerged? For ease of look at it, picture the centre of the prop, how much deeper should the rudder extend? Is there a general rule to this?

2) when people say .150 cable....is that the OD of the cable? the ID of the stuffing tube? or the OD of the liner?

3) Would it make sense to have the liner extend all the way out of the stuffing tube and through the piece that holds the prop adapter?

thanks, and here's a pic.

[crazzy maxx]

nice work.
i think it should run mabey .5mm below the outer sponsons.

[kookie_guy]

nice work.
i think it should run mabey .5mm below the outer sponsons.

0.5mm or 5mm?

[crazzy maxx]

0.5
or make it ajustable

[kookie_guy]

0.5
or make it ajustable

but look how far down the fuller's one goes. I'm talking about the rudder, not the prop. I just realized I had a typo up top.

[crazzy maxx]

i run mine and inch and 3 quaters off the bottom of the sponson and it handels nicely. but it is off set.

[kookie_guy]

I have a pretty cool idea I wanna draw up and simulate to see if there will be issues. The servo horn on the rudder is going to get moved directly to the pivot point. Being the way it is, if you modify the servo to use 2 linkages, it would not work because the distance changes as you turn. The pivot being in the middle, the length stays constant. The next step will be hydraulic steering arms. I gotta see if I can put these on with no binding, as they will be straight shaft from servo to steering. This way, you can use the servo to move and hold both rods, as opposed to push/pull steering you get with cable hydraulic arms.

Hmmmm, I got some planning to do.

[crazzy maxx]

im confused i need a picture to show me

[kookie_guy]

im confused i need a picture to show me

hehe, I'll have one tonight, maybe tomorrow at the latest.