NEW Pro Boat "ZELOS 36" Twin Cat

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • paulfromtulsa
    Senior Member
    • Nov 2013
    • 211

    #136
    Is that stock receiver waterproof

    Comment

    • Rafael_Lopez
      Senior Member
      • Jan 2015
      • 470

      #137
      Originally posted by Keagan-Z06
      Hey Rafael,

      What batteries are you using in the pic above?
      Team Orion sends me 90C soft pack LiPos. They don't sell soft packs.

      Originally posted by petej
      Can I program the stock Dynamite ESC's using the Seaking LED Program Box?
      Some say it works, I've never tried it. If the firmware isn't compatible it can corrupt the ESC.

      Originally posted by paulfromtulsa
      Is that stock receiver waterproof
      It is conformal coated, not potted. If you wet it, open the case and dry it, or discontinue use and leave it in the sun to try. If you get corrosion around the pins, clean it off with an old tooth brush. But in all reality, if you tape your hatch you will never get a drop of water in the boat.
      Rafael Lopez
      Product Developer-Pro Boat
      My Facebook https://www.facebook.com/profile.php?id=100010183246751

      Comment

      • JPriami
        N4FOX
        • Aug 2010
        • 1675

        #138
        Keagan-Z06, thank you. In those pictures except for the last picture. I was using a Nikon D5500 & the 55-300mm lens.
        Land, Sea & Air, A true RC Addict.

        Comment

        • JPriami
          N4FOX
          • Aug 2010
          • 1675

          #139
          Originally posted by kfxguy
          Jpraimi, please post in my mod thread when you swap props. Or even sharpen yours.
          Ok. I already balanced and lightly sharpened them. I did that Saturday(3.19.16) night. Then maiden her the following Monday(3.21.16). I'll be going out again Saturday 3.26.16 if weather permits. I have a pair of props I'm gonna try then. I am currently gps poor tho. I need to get another one soon. I just ordered my 2nd pair of the 11.1v 6000Mah 65c graphine packs so more go juice had priority.
          Land, Sea & Air, A true RC Addict.

          Comment

          • Keagan-Z06
            Senior Member
            • Mar 2016
            • 970

            #140
            Originally posted by JPriami
            Ok. I already balanced and lightly sharpened them. I did that Saturday(3.19.16) night. Then maiden her the following Monday(3.21.16). I'll be going out again Saturday 3.26.16 if weather permits. I have a pair of props I'm gonna try then. I am currently gps poor tho. I need to get another one soon. I just ordered my 2nd pair of the 11.1v 6000Mah 65c graphine packs so more go juice had priority.
            Can that battery work with ec5 plugs? I just ordered my second set of 11.1v 5000Mah 50c dynamite lipos in preparation for the Zelos
            Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

            Comment

            • JPriami
              N4FOX
              • Aug 2010
              • 1675

              #141
              I put my own ec5 plugs on it. As I always put my own plugs on everything I get. Memory is a little rusty but i think ec5 is rated for 120 amps. Esc is a 120 amp also. I have been known to use larger bullets. But this time I was just trying to keep it simple & match what the boat has. Also I can use my packs for my rc truck that I have ec5 on it. Well not the graphene packs but my other 7.4v 95c 7.500mah ones
              Land, Sea & Air, A true RC Addict.

              Comment

              • JPriami
                N4FOX
                • Aug 2010
                • 1675

                #142
                I got a DX4C DSMR 4-Channel AVC Transmitter with SRS4210 reciver to use on the Zelos. I wanted a water proof reciver for it. I figured I'd ask. Should I run it with the AVC on or turn it off?

                Edit:*The AVC system is not recommended for use in RC boats. So I'll leave that feature off.
                Last edited by JPriami; 03-23-2016, 06:18 AM.
                Land, Sea & Air, A true RC Addict.

                Comment

                • gfmarlin88
                  Junior Member
                  • Sep 2015
                  • 9

                  #143
                  I can't help but wonder why the zelos 48 never had near as much popularity as the 36 twin.....

                  Comment

                  • Keagan-Z06
                    Senior Member
                    • Mar 2016
                    • 970

                    #144
                    Originally posted by JPriami
                    Keagan-Z06, thank you. In those pictures except for the last picture. I was using a Nikon D5500 & the 55-300mm lens.
                    Thanks man! I am dying here waiting on my Zelos, I believe I won't get it until next week after the Easter Holidays. I went to my usual spot the other day to just get a run in, not pushing it, just cruising and took the Phantom 3 out with me, took my dad and my girl and both chicken out when it was time to pilot the drone or boat. So I couldn't get any footage. Will try again soon.
                    Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                    Comment

                    • Keagan-Z06
                      Senior Member
                      • Mar 2016
                      • 970

                      #145
                      Originally posted by JPriami
                      I put my own ec5 plugs on it. As I always put my own plugs on everything I get. Memory is a little rusty but i think ec5 is rated for 120 amps. Esc is a 120 amp also. I have been known to use larger bullets. But this time I was just trying to keep it simple & match what the boat has. Also I can use my packs for my rc truck that I have ec5 on it. Well not the graphene packs but my other 7.4v 95c 7.500mah ones
                      Sorry for the dumb ? here but how do you "put on your own EC5 plugs" I don't have the boat in front of me right now, so I can't really picture it, do you make them? Buy adapters? How is it done? I would want to give other packs a try but I always see them with Deans plugs, EC3 or some other type of connectors. Thanks!
                      Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                      Comment

                      • Keagan-Z06
                        Senior Member
                        • Mar 2016
                        • 970

                        #146
                        Originally posted by gfmarlin88
                        I can't help but wonder why the zelos 48 never had near as much popularity as the 36 twin.....
                        I'm thinking most people want fast and Electric boats seem to outrun the gas? Have no idea, just throwing that lame assumption out there!
                        Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                        Comment

                        • Keagan-Z06
                          Senior Member
                          • Mar 2016
                          • 970

                          #147
                          Plz delete
                          Last edited by Keagan-Z06; 03-23-2016, 09:23 AM. Reason: Dupe post
                          Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                          Comment

                          • Rafael_Lopez
                            Senior Member
                            • Jan 2015
                            • 470

                            #148
                            Originally posted by gfmarlin88
                            I can't help but wonder why the zelos 48 never had near as much popularity as the 36 twin.....
                            Unfortunately the Zelos 48 was released during winter, or the beginning of, which is not the ideal time to release a boat. I think that, along with the fact that to get top speed it has to be run on 8s, has put some people off. The 36 seems to be more of what people have been asking Pro Boat to make for some time know, along with being 6s compatible for top speed hits a tighter audience. Now that the twin has been released, I am going to start putting more time back in to the project and getting some more tuning in to, and speed out of the boat.

                            Originally posted by Keagan-Z06
                            Sorry for the dumb ? here but how do you "put on your own EC5 plugs" I don't have the boat in front of me right now, so I can't really picture it, do you make them? Buy adapters? How is it done? I would want to give other packs a try but I always see them with Deans plugs, EC3 or some other type of connectors. Thanks!
                            You simple solder them on like you would any other connector. Here is a video to illustrate how to solder on EC connectors to a battery; EC3 or EC5, the method is the same. https://www.youtube.com/watch?v=vYpJI1zJXOo
                            Rafael Lopez
                            Product Developer-Pro Boat
                            My Facebook https://www.facebook.com/profile.php?id=100010183246751

                            Comment

                            • Keagan-Z06
                              Senior Member
                              • Mar 2016
                              • 970

                              #149
                              Originally posted by Rafael_Lopez
                              Unfortunately the Zelos 48 was released during winter, or the beginning of, which is not the ideal time to release a boat. I think that, along with the fact that to get top speed it has to be run on 8s, has put some people off. The 36 seems to be more of what people have been asking Pro Boat to make for some time know, along with being 6s compatible for top speed hits a tighter audience. Now that the twin has been released, I am going to start putting more time back in to the project and getting some more tuning in to, and speed out of the boat.

                              You simple solder them on like you would any other connector. Here is a video to illustrate how to solder on EC connectors to a battery; EC3 or EC5, the method is the same. https://www.youtube.com/watch?v=vYpJI1zJXOo
                              Was just looking up videos, thanks as always Rafael. Im getting impatient waiting for the Zelos and this damn windy weather here is not helping the Voracity.
                              Proboat Voracity-E 36" , Proboat Zelos 36 Twin , Proboat Miss Geico 29" , Traxxas Spartan, Fightercat Daytona, Zonda

                              Comment

                              • Rafael_Lopez
                                Senior Member
                                • Jan 2015
                                • 470

                                #150
                                Originally posted by Keagan-Z06
                                Was just looking up videos, thanks as always Rafael. Im getting impatient waiting for the Zelos and this damn windy weather here is not helping the Voracity.
                                I don't know, Apexpredator is having some good runs with his Voracity in wind that he says is gusting to 30mph.
                                Rafael Lopez
                                Product Developer-Pro Boat
                                My Facebook https://www.facebook.com/profile.php?id=100010183246751

                                Comment

                                Working...