Did some testing today, new best

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • obrien
    Fast Electric Addict!
    • Nov 2007
    • 1264

    #1

    Did some testing today, new best

    I headed over to the pond this afternoon to see if I could crack 50 mph with the SV. I started with the ammo 2300, stock sv esc, 4s1p lipos, and a s&b x645. 44.5 mph was the best I could get. I went to my P741-4 and the boat ran 43.4 mph . I swapped over to my hydra 120 and a 4s2p setup with the x645 prop back on. The boat then went 52.0 mph before it went over. When I got it back over, the boat didn't hand too well after that so I brought it back in. The batteries had shifted so it was not ballanced very well. But I was happy, I finally cracked 50 with that hull. Now I just have to get it settled down.
  • hex-dj
    Senior Member
    • May 2008
    • 238

    #2
    Congratulations obrien!

    Comment

    • obrien
      Fast Electric Addict!
      • Nov 2007
      • 1264

      #3
      there is a little bit more in that setup with some time working on the setup and tweaking the prop. how much more I don't know but we shall see.

      Comment

      • Fluid
        Fast and Furious
        • Apr 2007
        • 8012

        #4
        How much lead weight have you added to the hull?



        l
        ERROR 403 - This is not the page you are looking for

        Comment

        • obrien
          Fast Electric Addict!
          • Nov 2007
          • 1264

          #5
          none yet. when I was playing around last weekend I had the tabs all the way down and the batteries a bit further forward so it was much more stable at 48.8 mph, but running a x440/3 blade prop. On my first pass the boat went over and moved te batteries around a bit so it was a bit of a handful to get it to run. If I can get the boat to set and not chine walk so badly i think it will be able to get some more speed without adding extra weight. Granted I am running a pair of 4s1p packs in the boat, so it may not need the extra weight.

          Comment

          • ibyte
            Member
            • Sep 2008
            • 83

            #6
            Good Job obrien

            Comment

            • obrien
              Fast Electric Addict!
              • Nov 2007
              • 1264

              #7
              thanks. i am going to play with the prop a bit to see what it has left in it. the more I think about it, I think I need to remove the tongue and see what happens from there.

              Comment

              • Jetbill
                Member
                • Sep 2008
                • 37

                #8
                nice, I have to try my hand at prop balancing and sharpening-maybe you can give me a lesson on friday..lol

                Comment

                • obrien
                  Fast Electric Addict!
                  • Nov 2007
                  • 1264

                  #9
                  lol, I will show you what to do, but you may not want to do it my way. its a little out of the ordinary.

                  Comment

                  • Avanti
                    Fast Electric Addict!
                    • Nov 2007
                    • 1280

                    #10
                    obrien is a hack, but it works for him
                    The Manx has been sitting dormant, but I think I finally have my motivation back. I hope to see it float soon.

                    Comment

                    • obrien
                      Fast Electric Addict!
                      • Nov 2007
                      • 1264

                      #11
                      don't hate cuz you ain't got my skilz yo

                      Comment

                      Working...