lipo on sv

[sjslhill]

Oh yes

We can carry those as well.......

thanks,
Steve

PolyQuest Li-poly Balancer/Overcharge protector
Features :

1. Cell balancing and Overcharge protection : High performance micro processor protects overcharging and controls cell balancing. Continuously discharge overcharged cells and charge undercharged cells. Automatically stops charging when each cell is fully charged.

2. Cell status indicators : The status of each cell is indicated by LED. High voltage cells: Flashing red LED, Low voltage cells : LED Off

3. Err/Check Indicator : 3 connectors are provided with balancer for 2Cell, 3Cell and 4Cell Li-Poly. Sold Green means correct connector and correct Li-Poly pack is used. Green LED flashed when unmatched connector is used. For example, Err/Check Led flashes when 2S connector is used for 3S Li-Poly





How to use:

1. Use supplied connectors(Adaptor) for 2S, 3S and 4S Li-Poly. Directly connect 5S Li-Poly to balancer.

2. Err/Check LED goes off when charging is in progress

3. When charging is in progress, cell indicator for each cell is continuously blinking or stay off. Blinking LED means high voltage cell and turned off LED means low voltage cell.

4. Err/Check LED turns on when charge is done.



Err/Check indicator : Green LED blinks on the following situation

1. Any one of the cell in the Pack is overcharged (Voltage is over 4.25 Volts)

2. Any one of the cell in the Pack is dead (Voltage is under 2.5Volts)

3. When input voltage to balancer is over 22V

[SJFE]

I never even thought to ask if you would . I will from now on.

[SJFE]

I got the DPR setup and tested. I just have to switch a couple wires due to the fact im a retard. Seems I cant follow a wiring diagram if my work is facing the opsosite direction...duuu. I'll get it finished and velcrowed in tomorrow night.

[no stick]

Look at the FMA cellpro 4s Lipo charger/ balancer. Price is right at $64.95 for the 3 amp model and $74.95 for the 4 amp model here:

http://www.fmadirect.com/products.htm?cat=45&nid=4

It charges and balances each cell of my Battlepack 3600 mAh 12/16C packs in less than an hour. Each cell is 4.2volts after balancing. I have 2ea of the 3 amp models and they also sell a 4 amp model.

The cellpro to Thunder Power/Polyquest adapter for $9.95 is what you need for the Battlepack 3600 because it comes with a Polyquest style plug.

Now if I can get rid of my motor stuttering I will really like these batteries. Top speed using the 7.4 volt 3600 connected in series is 39.8 on a M-445 prop and 40.6mph using 2ea per side 7.4 volt paralleled giving 7200 mAh and then connected in series using the existing Deans connectors giving 14.8 nominal voltage.

Espirit models sells a Deans paralled plug for $9.00 each here:

http://www.espritmodel.com/index.asp?PageAction=VIEWCATS&Category=627

Pic included and two are required.

[saleens7]

they are here as well

http://www.offshoreelectrics.com/pro...od=dh-gpmm3142