sv27 with36 \56 2030kv

[CHUD]

diesel

hay bud moved rudder forward and adding some more wood inside boat for batt's are thay to farforward looked at your's and I might be! The prop I can't tell what it is here's some pic's

[Diesel6401]

Rudder looks good, straighten the turn fin out a little looks to far faraward. Start with it straigth up and down. One problem you have is with those stock trim tabs. Those need to be updated either with the OSE trim tabs which I use or with the Kintec tabs. You need something with a set screw that applies constant pressure on the tab that way their not flexing up and down while running like yours will. Also avoid adding wood inside the boat for batts. Use just velcro all down the sides like I did. Your adding unneccessary weight to the boat. In the video the location I ran my boat was based on the water conditions. If their was more chop I would move them just a little more forward to keep the bow more stable, but in the video is the furtherst back I run and where I generally run them for calm to slight chop. Is that the stock prop? Swap to a metal one.

[CHUD]

diesel

Will do bud! going to order ose trim tab's I cant what untill hydro get's he's in the mail it's comming from Florida; he said it's still there, he also has a green one'but all stock;[ look's like he will be eating my wake]

[HYDROJERRY]

If so ill throw in my elam and spank ya hehehehe,,,,Ps tracking on the boat shows its in louisburg,,maybe get it wet this weekend YEEE HAAAA,,,,,

[CHUD]

hydro

I beat the sv27 will give that elam a run for it's money .see you for coffee in the morning

[ggcrna]

Ul-1 power in a SV, yea click the SV link in my signature and you will see a video of it. I run mid to high 40s with mine with ul-1 power. Good choice of batts, set up properly it should be a nice running SV. For props, 42x55, x642, 40x52/3 or x440/3. My boat doesn't have the teflon tubing either. It's better if it's their, but not major just make sure the flex shaft isn't touching or can rub the stuffing tube at the end before it hits the collet

Diesel, what type of esc do you run in your SV right now?
Thanks, Glenn

[Diesel6401]

Diesel, what type of esc do you run in your SV right now?
Thanks, Glenn

Right now i have a aquastar 120 in it with a 7xl (i was bored). Normally I have ul-1 motor & esc in it.

[CHUD]

diesel

Me and hydro ran this morning and everthing was allright untill I hit a wave from some boat's that were close by I thought the boat was ok than she started to clich and than stop in the water ,she came to; and Igot her to shour the antenna came out and was in the water I put her back in and went to the other side and she stoped ;so hydro started swimming ;can it be the antenna or something else!nothing was hot ;just warm;no water in the boat

[ggcrna]

Right now i have a aquastar 120 in it with a 7xl (i was bored). Normally I have ul-1 motor & esc in it.

Diesel: are the stock sv27 motor can and the UL 1 motor can the same diameter?
I will eventually replace my stock motor with the UL and wonder if I can use my Kintec jacket on the UL 1 motor . Thanks man, I viewed your collection of videos on you tube. Nice job.

Glenn

[Diesel6401]

Diesel: are the stock sv27 motor can and the UL 1 motor can the same diameter?
I will eventually replace my stock motor with the UL and wonder if I can use my Kintec jacket on the UL 1 motor . Thanks man, I viewed your collection of videos on you tube. Nice job.

Glenn

I know a kintec ul jackets on a sv motor will leak, Im not 100% sure about the other way around.

Thanks!!!

[wizard122]

No the SV and UL motors use different water jackets they are not interchangeable.

[Diesel6401]

No the SV and UL motors use different water jackets they are not interchangeable.

I figured that... just wasn't 100% sure

[ggcrna]

thanks gentlemen.

[CHUD]

thanks gentlemen.

Hay bra checked out your profile nice sv like the colorsYou should make it your avatar!Hay guy's take a look at my new toolbox for my sv .

[HYDROJERRY]

Awww das nice bra,,, when you want me to put your vid on here,,,or do you want to wait to get a better one yo!!!