Rio EP Pics!

[Brushless55]

It's a 550 can

[6S HYDRO]

3600 on 4s would get too hot too quick, but would be extremely fast for a saw type run

[hyrulejedi86]

Even with water cooling it would get too hot?

[6S HYDRO]

yes on 4s, try 3s and the right prop and it would fly

[hyrulejedi86]

Well 3s was the plan anyhow, so I'm sure it'll be fine

[Brushless55]

Think I'm going to try my 6L motor on 2s and see how she goes...

[Brushless55]

Wait hold up!
I have a spare SV27 motor and esc.. hmmm

[hyrulejedi86]

I was thinking about this motor:
http://www.hobbycity.com/hobbycity/s...r_(WaterCooled)

and like I said 3S so hopefully they will work together well and give me some great speed.

[Brushless55]

that should ripp!

[hyrulejedi86]

Oh I hope so, I have been so excited to get going on it!

[Brushless55]

if you can try it on 2s first to check that things will no fly apart and get to hot..
even on 2s it should fly!

[hyrulejedi86]

I don't have any 2s batteries or 3s I was just going to order them when I ordered the motor. Which whould I get, or should I just get a couple of each?

[Brushless55]

I don't have any 2s batteries or 3s I was just going to order them when I ordered the motor. Which whould I get, or should I just get a couple of each?

Well on 2s that motor will have twice the rpm of the stock motor and will run cooler on 2s... possible 30s
but 3s it would ripp!
hope nothing heats up to much on 3s

[hyrulejedi86]

So, I Picked up my Rio EP today but I didn't realize it didn't come with any batteries and unfortunatly I don't have any batteries besides 3s 1300mAh and I was wondering if this would just be too much for the stock motor?

[Brushless55]

its only a 1300mah battery so the amps wont hurt but the volts may?