UL-1 set up

[xxxrems38xxx]

i' ve got a UL-1 hull with no configuration, somebody could help me?I would like to reach 50mph or + thanks

[scoota]

http://forums.offshoreelectrics.com/...ad.php?t=13965

[Doby]

Stock UL-1 motor and controller on 4S....with the right prop will get you there as well...

[xxxrems38xxx]

i think the ammo 2300kv with stock esc and grimracer 40/57 -3 blades is good according to some research... thanks

[Diesel6401]

i think the ammo 2300kv with stock esc and grimracer 40/57 -3 blades is good according to some research... thanks

Stock motor is better, JMO. Drop the strut to a little over an 1" and slap a L40x57 prop on it. You should hit or be close to 50mph, with a simple prop change.

[detox]

Too much wind and choppy water conditions will make you slow and unstable. Calmer water conditions are lots faster (prop stays in the water).

[xxxrems38xxx]

ok stock motor is ammo 2030kv I add to my list! and it is true that this boat is to be used in calm water, a little wave at full speed and it is the insured swimming! grrrr

[Doby]

Define calm water........

[FEJohn]

I find that my UL-1 runs faster on water with slight ripples instead of glass flat. I'm at 45 mph with with the Girm lifter 3 blade S&B, everything is else is stock. I wanna hit the 50 mph mark also. I little more adjustment work and I'll get there.