53.1 mph stock UL-1

[Brushless55]

Ya, that's a good one!

video of a smoking reciever

[LiPo Power]

CC BEC up to 25V, 6S input with 4.8 - 9.0 volts selectable output using USB link

[6S HYDRO]

i know my reciever started smoking today and i ran to get the camera, but by the time i got back it quit smoking so i didnt take any video

[Brushless55]

i know my reciever started smoking today and i ran to get the camera, but by the time i got back it quit smoking so i didnt take any video

were you trying to get a video of a smoking reciever?

[6S HYDRO]

sarcasm

[Brushless55]

[Rumdog]

How is an external bec rated at 3s? Why not just run a rx pack?

[6S HYDRO]

you guys dont need any bec. stock bec in the esc works perfectly- even at 5s

[Brushless55]

How is an external bec rated at 3s? Why not just run a rx pack?

That's how is was made..
I though I bought a 6s BEC, but the burnt rx said not!

[6S HYDRO]

if it burnt the rx that means the bec was putting out to much volts/amps to the receiver. like i said the esc's bec works great-no need for an external

[Brushless55]

if it burnt the rx that means the bec was putting out to much volts/amps to the receiver. like i said the esc's bec works great-no need for an external

Yes yes yes...
I put on the BEC because of the issues that came with the first batch of escs I read about.. a little added insurance, so I thought

but I'm going to give my UL-1 a try on 5s and the stock esc

[6S HYDRO]

just add caps to esc. every local radio shack has them for 1.39 ea. 35v 1000uf

[Brushless55]

just add caps to esc. every local radio shack has them for 1.39 ea. 35v 1000uf

I've read about these. Tell me again what this does for the esc
and pics would help me out

[6S HYDRO]

i add 2

[6S HYDRO]

they are the weak link to the esc not the bec. you need to add on to the origional cap. i will try to get you piks of mine, but there are many on this forum