New AquaCat

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Rumdog
    Fast Electric Addict!
    • Mar 2009
    • 6453

    #106
    looks chinsy to me.. Plus, the blunt looking tunnel entrance. ew.

    Comment

    • airman66285
      Senior Member
      • Aug 2009
      • 244

      #107
      Originally posted by Rumdog
      looks chinsy to me.. Plus, the blunt looking tunnel entrance. ew.
      The blunt leading edge gave me a little pause...it kind of looks like my PB Apache in that area. It would be nice if it had a sharpened leading edge.

      Comment

      • Brushless55
        Creator
        • Oct 2008
        • 9488

        #108
        Originally posted by airman66285
        The blunt leading edge gave me a little pause...it kind of looks like my PB Apache in that area. It would be nice if it had a sharpened leading edge.
        Possibly gives it more strenght
        .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

        Comment

        • Diesel6401
          Memento Vivere
          • Oct 2009
          • 4204

          #109
          Like Brushless said it's scaled off of the Skakter 368. Looks just like it. http://www.motleycrewracing.com/
          Attached Files
          - Diesel's Youtube
          - Diesel's Fleet
          "It is easier to be wise for others than for ourselves"

          Comment

          • Rumdog
            Fast Electric Addict!
            • Mar 2009
            • 6453

            #110
            It is much wider than scale, just like the MG. The blunt front end reminds ME of the UL-1. Hopefully this hull is a tad stronger.

            Comment

            • Diesel6401
              Memento Vivere
              • Oct 2009
              • 4204

              #111
              Originally posted by Rumdog
              It is much wider than scale, just like the MG. The blunt front end reminds ME of the UL-1. Hopefully this hull is a tad stronger.
              I think darin mentioned something before about they don't scale down really well or something. So yea I think you would be right it is wider.

              I might have to get 2, one in this paint and 1 I will take all the decals off and make it all white.
              - Diesel's Youtube
              - Diesel's Fleet
              "It is easier to be wise for others than for ourselves"

              Comment

              • Brushless55
                Creator
                • Oct 2008
                • 9488

                #112
                Originally posted by Diesel6401
                Like Brushless said it's scaled off of the Skakter 368. Looks just like it. http://www.motleycrewracing.com/
                Yeah!
                that last picture was made for me!!
                .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                Comment

                • Rumdog
                  Fast Electric Addict!
                  • Mar 2009
                  • 6453

                  #113
                  Originally posted by Diesel6401
                  I think darin mentioned something before about they don't scale down really well or something. So yea I think you would be right it is wider.

                  I might have to get 2, one in this paint and 1 I will take all the decals off and make it all white.
                  They can be more scale looking. (HPR, MHZ, H&M) However, making them a little wider than scale helps them excel in the corners which is better for racing, and newbies alike.

                  I do like this boat, and I'm sure it will handle great with all the race testing it has undergone. BUT, I hope it is a better constructed hull than the UL-1, or new sv27R.

                  Comment

                  • Diesel6401
                    Memento Vivere
                    • Oct 2009
                    • 4204

                    #114
                    Originally posted by Rumdog
                    They can be more scale looking. (HPR, MHZ, H&M) However, making them a little wider than scale helps them excel in the corners which is better for racing, and newbies alike.

                    I do like this boat, and I'm sure it will handle great with all the race testing it has undergone. BUT, I hope it is a better constructed hull than the UL-1, or new sv27R.


                    Yea the SV27R transom issues was really disappointing. If they would have just keep the doubler that boat would rock. I will keep my orginal SV and when I get this boat I will put the power into my old sv. For this boat i think I am going to run my CC 1800kv Outrunner. Should sound really nice in this boat.
                    - Diesel's Youtube
                    - Diesel's Fleet
                    "It is easier to be wise for others than for ourselves"

                    Comment

                    • stringfly
                      Member
                      • Jul 2010
                      • 88

                      #115
                      Motley Crew

                      AquaCraft site info:


                      Stringfly <>++++
                      Attached Files

                      Comment

                      • Grimracer
                        Senior Member
                        • Nov 2008
                        • 662

                        #116
                        Hi Gang..

                        Everything.. and I do mean EVERYTHING is and was perfomance driven.. even the "Blunt" front edge..

                        Run it.. I dare ya!

                        Grim

                        Comment

                        • Brushless55
                          Creator
                          • Oct 2008
                          • 9488

                          #117
                          Originally posted by Grimracer
                          Hi Gang..

                          Everything.. and I do mean EVERYTHING is and was perfomance driven.. even the "Blunt" front edge..

                          Run it.. I dare ya!

                          Grim
                          .NAMBA20...Caterpillar UL-1, P-Spec OM29, P-Mono DF33, P-Spec JAE, Aussie 33" Hydro-LSH, Sprintcat CC2028 on 8s, PT SS45 Q Hydro, PS295 UL-1 power, OSE Brothers Outlaw QMono 4-sale, Rio 51z CC2028 on 8s

                          Comment

                          • shannon87
                            Senior Member
                            • Aug 2010
                            • 222

                            #118
                            Hi all i thought id add since im a huge fan of cats and the movement of spec/rtr racing which im hoping with my detication and persistance i can kick off a class to help newbs that are on a budget to get into the sport.

                            Because unfortunately my local club mostly consists of fuel boats and huge dollar electrics which are few and far in between which kinda scares potential members off as it did me.

                            The only specification is the norm EA,EB,EC classes and most elecrics are EC monsters lol i know its all about numbers and such but it dont help when a few select members dont really lappreciate electric boats and newbs which offer exitement and diversity as they have only known and raced fuel boats.

                            I have the support of the ampba prez and other members of kinda being a newb ambassator lol so hopefully with the motley crue and word of mouth i can prove to the guys and newcomers that there is a good alternative.

                            As most assume the only way to start racing is buy a gas or nitro boat as its what they see most of there is nothin wrong with those but most are big dollar ex race boats as RTR doesnt seem to be a favourable option as i asked about an sv27 nitro and that was shot down quick so was any other RTR options.

                            Which led me down a long and torturous journey on facing the fact the only way i can race is gettin one built from scratch or buying a used boat and followin a steep learing curve with nitros and gassers.

                            But with alot of persistance and spreading of word with thanks to the geico,motley crue,and sv27 i have found my perfect option being the motley crue as im more partial to cats and alot of determination im plannin on getting the motley and shaking things up and hopefully kicking off a LSO class of some sort and doin some custom work also.

                            I just wish it was like america over here as there is so much more support and diversity i suppose i helps with your country having 50 states and us only 6 lol and you guys have been doin it way longer.

                            And thanks to grim and darin for designing such great machines and getting me one step closer to my dream and cant wait for the motley crew to come out.



                            To save another post lol and i hope this recieves some positive feed back as i have a unique and custom plan for the boat after i have had ot for a while and i have mentioned this idea to some but basically i would like to put an outboard on this boat but since graupner is an expensive outboard and EP1s unfortunatley have a weakness of which being the gears.

                            So i thought id go for another option which would cross the brand name line lol and that would be using a proboat outboard. With some help from a fellow boater which has offered to help me set the boat up.

                            I also plan on getting some goodies from kintec racing nothing major though and a custom wrap done by mono jeff basically those will be the major changes as the aquacraft gear is pretty awesome plus the unique layout of the water cooling system is pretty cool so im going to try and keep it unique but just have the motor behind the esc.

                            Anyways it should turn out well i suppose i should ask the creators opinion lol so grim what do you think about a proboat outboard on your cat ? and anyone else who wants to add their opinion.

                            And i apologize for such a long rant but i offer my full support
                            Last edited by shannon87; 03-09-2011, 02:17 AM.

                            Comment

                            Working...