If money is no issue, leave you're revolt alone and build a boat that can handle the speed and put a Neu or castle motor in it.
Revolt 30 how too hit 70mph
Collapse
X
-
-
-
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
Random,
Here is a stock Revolt running a grimracer L45x68 prop.
I am personally not looking for more than higher 40's on my Revolt. If I ever decide to go faster I will build a new boat from scratch and select the appropriate hull that can take the speed.Last edited by gyrotron; 09-04-2012, 04:16 PM.Comment
-
i had gps my revolt at 44mph stock with m445 back cut inside trims just about level with the hullComment
-
Box stock Re Volt and prop that it came with it 44.7 mph EagleTree. You need a different boat/motor/prop to do what you want.Do It Like You Mean It .....or Don't BotherComment
-
-
<iframe width="560" height="315" src="http://www.youtube.com/embed/U5d3FZViec8" frameborder="0" allowfullscreen></iframe>Comment
-
-
You tryin to post this??????? Gonzo power you have there............get it on some glass and run wide open, she what she can do!! I say high 50's.
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
-
NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE:http://forums.offshoreelectrics.com/...est!&highlight=
Comment
Comment