which props??

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • launchpad
    Senior Member
    • Oct 2008
    • 194

    #1

    which props??

    I need some suggestions on what props I can use. The specifics are as follows.Genesis Rc Boat 38" cat;2x3674-2700kv;2x125amp hk esc,2x5200mah 4 cell 45c lipo.and a ubec.I do not know how to calculate it to get the best ones.This is my first dual motor rc boat that I built.
    Any help will be greatly appreciate it. Have A Good One
  • Make-a-Wake
    FE Rules!
    • Nov 2009
    • 5557

    #2
    If you have counter rotational props, which would be best, try out the Octura x442 L + R's.............but i would only run it on 3 cells each.......

    http://www.offshoreelectrics.com/pro...prod=oct-x442r

    batts - http://www.hobbyking.com/hobbyking/s..._3S1P_40C.html
    NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

    Comment

    • launchpad
      Senior Member
      • Oct 2008
      • 194

      #3
      which props

      Originally posted by Make-a-Wake
      If you have counter rotational props, which would be best, try out the Octura x442 L + R's.............but i would only run it on 3 cells each.......

      http://www.offshoreelectrics.com/pro...prod=oct-x442r

      batts - http://www.hobbyking.com/hobbyking/s..._3S1P_40C.html
      Thankyou for the info,are the props metal or......What would happen if I decided to run 4 cell batteries.Would something fry or melt.I will be ordering those props from Steven at OSE. Thanks Again
      AL
      Last edited by launchpad; 01-11-2012, 06:27 PM. Reason: wrong info

      Comment

      • Make-a-Wake
        FE Rules!
        • Nov 2009
        • 5557

        #4
        4s may put you over the safe zone for the ESC's.............. If you have to go 4s then cut these down to around 38-39mm..............my opinion of course, lets see who else chimes in. 2700 kv is right in the 3s zone for a motor, what brand motor is it by the way..........and 2 pole or 4 pole?

        PS, you running counter rotating?.............oh, and these are berylium
        NEED PARALLEL CONNECTORS?? QUALITY 5.5MM, 8MM, 8 AND 10 AWG, GET THEM HERE: http://forums.offshoreelectrics.com/...est!&highlight=

        Comment

        • launchpad
          Senior Member
          • Oct 2008
          • 194

          #5
          which props

          Originally posted by Make-a-Wake
          4s may put you over the safe zone for the ESC's.............. If you have to go 4s then cut these down to around 38-39mm..............my opinion of course, lets see who else chimes in. 2700 kv is right in the 3s zone for a motor, what brand motor is it by the way..........and 2 pole or 4 pole?

          PS, you running counter rotating?.............oh, and these are berylium

          Forgot to tell you the make of motors.They are the FSD motors.Guess I will see how could they are.If they blow ,then I will get 2 leopard 4074.I will more than likely get the 3 cells start from there. Have a good one

          Comment

          Working...