2.3mm to .098 quality coupler, or 2040 motor w/ 3mm shaft?

[Dashunde]

I just started messing with my new TFL Small Bolt.. first thing I did was to make sure the radio/esc/motor/servo all work, so I spun it up... it buzzes like crazy
The 2.3 coupler kinda sucks with its wobbling.

Is there a better 2.3mm-.098" coupler out there, or maybe a motor in this same class with a 3mm shaft?

[NativePaul]

Do you want a grub screw or collet type coupling? Evgeny at Ecomaster.torgg sells the grub screw type in 2.3mm-2.5mm, 2.5mm is 0.0984

http://ecomaster.torgg.com/collection/mini-eco/product/mufta-dlya-soedineniya-vala-dvigatelya-i-grebnogo-vala

[Dashunde]

I guess this would be ideal as it wouldnt mess up/fray the cable end with a grub screw... but I dont see it in the correct 2.3mm - .098"/~2.5mm though.
Its also way over in the UK..

[NativePaul]

That link goes to a grub screw one doesn't it? If so it is the tenth one on the drop down size menu. I thought he did collets too which is why I mentioned it, but when I checked his collets are not available in that size.

Evgeny is in Ukraine, not UK. You don't have to buy it, but if you can't find it elsewhere, there is a quality part available.

[Dashunde]

Ok, thanks, yea the link is to the collet style that isn't sold in 2.3x2.5
The dual grub version is the TFL stock part, guess I'll see what I can do about balancing it a bit, maybe a ziptie will get some of the buzzing out..

[ray schrauwen]

Do you want a grub screw or collet type coupling? Evgeny at Ecomaster.torgg sells the grub screw type in 2.3mm-2.5mm, 2.5mm is 0.0984
http://ecomaster.torgg.com/collectio...-grebnogo-vala

Thank you! Those are nice and I could use one of those 2mm - .125"

[Gromov]

Yes, dear gentlemens. This coupling and collets in stock...