Looking for Offshore Warrior or similar

[MassiveOverkill]

Well bullocks!!

[MassiveOverkill]

Bill have you had a chance to test out the Bullet? http://www.joysway-hobby.com/Product_show.asp?proid=506

My next boat is going to be another Joysway, either the Bullet or Offshore Warrior. They're about the same price. I know the Bullet is plastic while the Warrior is glass.

[BILL OXIDEAN]

Haven't tried one yet, but believe me I'm interested..

[CP598]

Bill.... or anyone else that can answer this question. What type of connectors does the Offshore Warrior have on the ESC from the factory?

Thanks.

[martin]

Bill.... or anyone else that can answer this question. What type of connectors does the Offshore Warrior have on the ESC from the factory?

Thanks.

Deans.

[CP598]

Deans.

Thanks Martin.

[CP598]

Postman Delivered

Looky what the postman delivered today!

[MassiveOverkill]

Nice, where'd ya order from?

[CP598]

Ebay

[MassiveOverkill]

This one?

http://www.ebay.com/itm/RC-Brushless-Powered-Mini-Deep-Vee-Racing-Boat-Water-Cooling-Plug-N-Play-/370626690393?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D1549663198437964943%26pid%3D100015%26prg%3D1006%26rk%3D1%26

Man, waiting for Joysway stock to deplete so they can do their 'launch' is taking too long.

[CP598]

This one?

http://www.ebay.com/itm/RC-Brushless-Powered-Mini-Deep-Vee-Racing-Boat-Water-Cooling-Plug-N-Play-/370626690393?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D1549663198437964943%26pid%3D100015%26prg%3D1006%26rk%3D1%26

Man, waiting for Joysway stock to deplete so they can do their 'launch' is taking too long.

Yep... ordered on Monday, arrived on Thursday to WA. state. The price was a little higher than I had hoped to pay, but I was tired of waiting for someone in the states to be a distributor.

[MassiveOverkill]

Thanks, I may order one myself since I already have TX/RX I can reuse.

[CP598]

Thanks, I may order one myself since I already have TX/RX I can reuse.

As you can see, they may only have a few left.

[MassiveOverkill]

Hey CP, is the stuffing tube on yours curved as Martin said it would be or straight? Curious how much the bottom of the hull has changed compared to the original Warrior.

Also it seems to have this motor:

http://www.emaxmodel.com/views.asp?hw_id=246

Can you determine if it has any markings to verify or if you can visually inspect if it's the 6, 8 , or 11 motor (I believe those numbers may refer to the number of pole magnets). Maybe it even has the KV rating somewhere on the can itself.

Good to know that spares are cheap:

http://www.valuehobby.com/xyh-b2445-...ner-motor.html

Thanks.

[martin]

The motor used in the Offshore Warrior is an FSD 2445 3000kv with 3.17mm ( .125" ) shaft. Martin.