hobbycity esc

[j.m.]

I have the hobby city esc.

Technically the supersimple esc. They replaced this series with the new hobby city ones though.

[screwball]

ok cool if you dont mind me asking what setup are you running it in

[j.m.]

Ummmm.....

I first had it in a 6 cell rigger that had a 3500kv motor. So needless to say it didn't go too hot.

Then a 21" mono with the same motor on 8 cells. Prop was too small to get it on plane, but would have been perfect according to FEcalc.

Now it's going back into the rigger on 8 cells. :) FEcalc says i'll be drawing around 30A continuous, but certainly more peak. I'll report back on how it goes.

[FRED]

hobbycity esc

Nothing.