I was running my feigao 380 powered 25 delta copy the other day on 3s lipo, its a solid performer, but its really pushing the esc and motor. Well, the boat quit running the other day to my surprise. My son retrieved the boat and said the hatch was steaming hot. I told him not to open it and get away quick fearing a fire. I opened it to find a esc that took so much heat the wires unsoldered from the esc. I was surprised to find this because this boats been run dozens of times with no problems. While looking for answers found it, a small piece of leaf in the esc cooling plate that blocked 95% or more of the water passing.
Moral of the story, run a more conservative setup or keep a better eye on the water flow from the outlet

Moral of the story, run a more conservative setup or keep a better eye on the water flow from the outlet



Comment